[design/2014/cvut-logo-blue.png]
CZ / EN

Ústav technologie obrábění,
projektování a metrologie

CZ   / EN  

Lidé

Zdeněk Pitrmuc

Ing. Zdeněk Pitrmuc, Ph.D.

zdenek.pitrmuc (zavináč) fs.cvut.cz

zástupce vedoucího / ústav technologie obrábění, projektování a metrologie / Fakulta strojní

(22 435) 2603

místnost: B1-116, Dejvice

Navigace

Další informace můžete nalézt v centrální databázi. V3S.

Granty

  • FW10010520  
    Digitalizace a automatizace výroby lopatkových dílů pro udržitelnou energetiku – Pitrmuc, Z. (2024-2026)
  •  
    Optimalizace technologie laserového svařování a tváření nerezových trubiček pro firmu ATTL – Pitrmuc, Z. (2018-2019)

Článek v periodiku

2025

  • Removing High-Velocity Oxyfuel Coatings Through Electrolytic Dissolution – Pitrmuc, Z.; Rana, V.; Slaný, M.; Kyncl, J.; Pathak, S.; Beránek, L., Journal of manufacturing and materials processing. 2025, 9(2), ISSN 2504-4494.
  • Conformal cooling as a support tool for eliminating local defects in high-pressure die casting series production – Andronov, V.; Pitrmuc, Z.; Zajic, J.; Šotka, P.; Beránek, L.; Bock, M., Progress in Additive Manufacturing. 2025, 10(2), 1511-1528. ISSN 2363-9520.

2023

  • Novel drill geometries for dry drilling of stainless steel – Pelikán, L.; Slaný, M.; Stránský, O.; Beránek, L.; Pitrmuc, Z. et al., Journal of Manufacturing Processes. 2023, 92(4), 500-520. ISSN 1526-6125.

2022

  • Laser polishing of additively manufactured 316L stainless steel with different construction angles – Primus, T.; Beránek, L.; Pitrmuc, Z.; Zeman, P.; Šimota, J., The International Journal of Advanced Manufacturing Technology. 2022, 121(5-6), 3215-3228. ISSN 0268-3768.
  • Mechanical and Microstructural Anisotropy of Laser Powder Bed Fusion 316L Stainless Steel – Pitrmuc, Z.; Šimota, J.; Beránek, L.; Mikeš, P.; Sommer, J.; Holešovský, F.; Andronov, V., Materials. 2022, 2022(15(2)), 1-21. ISSN 1996-1944.

2021

  • Life assessment of a low-alloy martensitic steel under isothermal low-cycle fatigue-creep and thermo-mechanical fatigue-creep loading conditions – Bartošák, M.; Horváth, J.; Pitrmuc, Z.; Horváthová, M., International Journal of Fatigue. 2021, 145 ISSN 0142-1123.

2019

  • Production process planning in Additive manufacturing and Conventional machining technology manufacturing system – Kellner, T.; Kyncl, J.; Pitrmuc, Z.; Beránek, L.; Kaňák, M.; Kyncl, M., Manufacturing Technology. 2019, 19.(2.), 232-237. ISSN 1213-2489.

2018

  • Surface Integrity after Turning a Duplex Stainless Steel with Respect to Tool Geometry – Čapek, J.; Kolařík, K.; Neslušan, M.; Pitrmuc, Z.; Beránek, L.; Trojan, K.; Němeček, J.; Ganev, N. et al., Transactions of Famena. 2018, 42(4), 1-14. ISSN 1333-1124.
  • Residual Stress Determination of Duplex and Austenite Steels Machined using Different Tool Geometry – Čapek, J.; Kolařík, K.; Pitrmuc, Z.; Beránek, L.; Ganev, N., Materials Structure in Chemistry, Biology, Physics and Technology. 2018, 25(2), 84-87. ISSN 1211-5894.
  • Analysis of material removal on radial compressor wheel of aircraft engine after finishing production operations using CMM – Mikeš, P.; Beránek, L.; Pitrmuc, Z., MM Science Journal. 2018, 4_2018(4), 2521-2525. ISSN 1805-0476.

2017

  • FOD Experimental Simulation and Analysis of Potential Benefits of Modified Blisk Geometry – Beránek, L.; Pitrmuc, Z.; Šimota, J., Manufacturing Technology. 2017, 17(3), ISSN 1213-2489.
  • FOD experimental simulation and analysis of potential benefits of modified blisk geometry – Beránek, L.; Pitrmuc, Z.; Šimota, J., Manufacturing Technology: Journal for Science, Research and Production. 2017, 17(3), 287-291. ISSN 1213-2489.

2016

  • Importance and Methods of Residual Stress Profile Measurement – Pitrmuc, Z.; Rázek, V.; Beránek, L.; Vrabec, M.; Šimota, J., Manufacturing Technology. 2016, 16(3), ISSN 1213-2489.
  • Tool Geometry Influence on Surface Integrity of Machined Austenite Stainless Steel – Pitrmuc, Z.; Čapek, J.; Kolařík, K.; Beránek, L.; Urban, J., Manufacturing Technology. 2016, 16(2), 423-431. ISSN 1213-2489.
  • Importance and methods of residual stress profile measurement – Pitrmuc, Z.; Beránek, L.; Rázek, V.; Vrabec, M.; Šimota, J., Manufacturing Technology. 2016, 2016(3), 590-595. ISSN 1213-2489.
  • Grinding of Inconel 713 Superalloy for Gas Turbines – Čapek, J.; Kyncl, J.; Kolařík, K.; Beránek, L.; Pitrmuc, Z.; Medřický, J.; Pala, Z., Manufacturing Technology. 2016, 16(1), 38-45. ISSN 1213-2489.

2015

  • New possibilities for efficient laser surface treatment by diode-pumped kW-class lasers – Brajer, J.; Švábek, R.; Rostohar, D. R.; Divoky, M. D.; Lucianetti, A. L.; Mocek, T. M.; Mádl, J.; Pitrmuc, Z., The Journal of Engineering. 2015, 3(1), ISSN 2051-3305.
  • Application of laser shock processing – Brajer, J.; Mádl, J.; Pitrmuc, Z.; Švábek, R.; Zeman, P. et al., Manufacturing Technology. 2015, 15(3), 278-285. ISSN 1213-2489.

Stať ve sborníku

2020

  • APPLICATION OF 3D PRINTING FOR PRODUCTION OF CAMOUFLAGE JIG FOR TECHNOLOGICAL TESTS OF POLISHING AIRCRAFT ENGINE COMPONENTS – Urban, J.; Beránek, L.; Pitrmuc, Z.; Sommer, J., In: TECHNOLOGICAL FORUM 2020. Jaroměř: Ing. Jan Kudláček, 2020. p. 147-150. ISBN 978-80-87583-32-6.
  • EVALUATION OF DIMENSIONAL AND SURFACE QUALITY OF A PART PRODUCED BY THE DMLS METHOD AFTER MACHINING – Pelikán, L.; Andronov, V.; Beránek, L.; Šimota, J.; Pitrmuc, Z., In: TECHNOLOGICAL FORUM 2020. Jaroměř: Ing. Jan Kudláček, 2020. p. 113-120. ISBN 978-80-87583-32-6.
  • VERIFICATION OF THE ACCURACY OF METALLIC 3D PRINTING ON A BENCHMARK ARTIFACT MADE OF ALSI10MG POWDER – Andronov, V.; Pelikán, L.; Beránek, L.; Šimota, J.; Pitrmuc, Z., In: TECHNOLOGICAL FORUM 2020. Jaroměř: Ing. Jan Kudláček, 2020. p. 14-20. ISBN 978-80-87583-32-6.
  • ANALYSIS OF TOOL STEEL 1.2709 PRODUCED BY METALLIC 3D PRINTING – Andronov, V.; Pitrmuc, Z.; Pelikán, L.; Beránek, L.; Šimota, J., In: TECHNOLOGICAL FORUM 2020. Jaroměř: Ing. Jan Kudláček, 2020. p. 7-13. ISBN 978-80-87583-32-6.

2019

  • Creep feed grinding optimization – Šimota, J.; Pitrmuc, Z.; Štajnochr, L.; Beránek, L., In: Technological forum 2019 Book of proceeding. Jaroměř: Kudláček Jan, Ing., 2019. p. 138-142. first. ISBN 978-80-87583-30-2.
  • Comparison of mechanical properties of precipitation hardening tool steel 1.2709 - printed x conventionally produced – Andronov, V.; Pitrmuc, Z.; Pelikán, L.; Beránek, L.; Urban, J., In: TECHNOLOGICAL FORUM 2019. Jaroměř: Ing. Jan Kudláček, 2019. p. 1-7. ISBN 978-80-87583-30-2.
  • Precision and dimensional limits analysis of aluminium alloy artifacts produced on DMLS machine Concept laser M2 cusing – Pelikán, L.; Andronov, V.; Beránek, L.; Šimota, J.; Pitrmuc, Z.; Urban, J., In: TECHNOLOGICAL FORUM 2019. Jaroměř: Ing. Jan Kudláček, 2019. p. 109-115. ISBN 978-80-87583-30-2.

2018

  • Utilization of new modified materials in creep-feed grinding – Šimota, J.; Pitrmuc, Z.; Urban, J.; Holešovský, F., In: Konference studentské tvůrčí činnosti. ČVUT v Praze, fakulta strojní, 2018. ISBN 978-80-01-06421-4.

2017

  • Investigation on residual stress profiles and microhardness on Ti6Al4V alloy – Pitrmuc, Z.; Savinov, A.; Šimota, J.; Beránek, L.; Rázek, V., In: Technological forum 2017 Book of proceedings. Jaroměř: Kudláček Jan, Ing., 2017. pp. 106-110. ISBN 978-80-87583-22-7.
  • Influence of process parameters and part orientation on mechanical properties for DMLS manufactured Stainless steel AISI 316L – Pitrmuc, Z.; Šimota, J.; Beránek, L.; Urban, J., In: Studentská tvůrčí činnost 2017. Praha: ČVUT v Praze - Fakulta strojní, 2017. ISBN 978-80-01-06143-5.
  • Anisotropy of parts produced using DMLS technology – Šimota, J.; Pitrmuc, Z.; Urban, J.; Beránek, L., In: Studentská tvůrčí činnost 2017. Praha: ČVUT v Praze - Fakulta strojní, 2017. ISBN 978-80-01-06143-5.
  • Grain orientation influence on residual stress distribution of ground surface of blade roots made of inconel 713LC – Čapek, J.; Gancarczyk, K.; Pitrmuc, Z.; Kolařík, K.; Málek, J.; Beránek, L.; Ganev, N.; Trojan, K., In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 115-121. ISBN 978-80-553-3167-6.
  • Comparison of Parameters of Surface Integrity of Machined Duplex and Austenite Stainless Steels in Relation to Tool Geometry – Čapek, J.; Pitrmuc, Z.; Kolařík, K.; Beránek, L.; Ganev, N., In: Acta Polytechnica CTU Proceedings. Praha: Czech Technical University in Prague, 2017. p. 1-7. 9. ISSN 2336-5382. ISBN 978-80-01-06298-2.
  • Evaluation of mechanical properties manufactured parts by DMLS technology – Šimota, J.; Pitrmuc, Z.; Urban, J.; Koptiš, M., In: Technological forum 2017 Book of proceedings. Jaroměř: Kudláček Jan, Ing., 2017. pp. 127-132. ISBN 978-80-87583-22-7.

2016

  • Experimental methods of residual stress profile mea surement – Pitrmuc, Z.; Vrabec, M., In: Studentská tvůrčí činnost 2016. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2016. ISBN 978-80-01-05929-6.
  • Residual Stress Determination of Duplex and Austenite Steels Machined using Different Tool Geometry – Čapek, J.; Kolařík, K.; Pitrmuc, Z.; Beránek, L.; Ganev, N., In: MATERIALS STRUCTURE. Praha: Krystalografická společnost, 2016. pp. 362-363. ISSN 1211-5894.
  • Influence of Cutting Conditions on Surface Integrity after Progressive Grinding of Blade Roots from Inconel 713LC – Čapek, J.; Kolařík, K.; Pitrmuc, Z.; Ganev, N.; Beránek, L.; Trojan, K.; Kyncl, J.; Šimota, J., In: Experimental Stresss Analysis 2016. Plzeň: Západočeská universita, Fakulta aplikovaných věd, 2016. ISBN 978-80-261-0624-1.
  • Tool Geometry Influence on Residual Stresses of Machined Duplex and Austenite Stainless Steel – Čapek, J.; Kolařík, K.; Pitrmuc, Z.; Beránek, L.; Ganev, N., In: Sborník příspěvků 6. studentské vědecké konference fyziky pevných látek, Sedliště 2016. Praha: Česká technika - nakladatelství ČVUT, 2016. pp. 52-55. ISBN 978-80-01-06072-8.

Patent, užitný a průmyslový vzor

2017

  • Přípravek pro upínání lopatek pro letecký a energetický průmysl na rovinné brusky – Beránek, L.; Kyncl, J.; Pitrmuc, Z.; Šimota, J.; Vyskočil, Z., Czechia. Utility Model CZ 30673. 2017-05-15.

Prototyp, funkční vzorek

2018

  • Přípravek na řezání profilů zárubní – Pitrmuc, Z.; Slaný, M.; Sommer, J., [Functional Sample] 2018.

Zpráva

2020

  • Závěrečná zpráva o dasažených výsledcích projektu TH03010089 – Pitrmuc, Z.; Beránek, L.; Sommer, J.; Urban, J.; Pala, Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2020.
  • Optimalizace výroby nerezových trubiček v roce 2020 – Pitrmuc, Z.; Sommer, J.; Slaný, M., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2020.
  • Zpráva o postupu prací a dosažených výsledcích projektu FV40133 za rok 2020 – Pitrmuc, Z.; Beránek, L.; Sommer, J.; Slaný, M.; Hošek, J.; Mikeš, P.; Bartyzal, J.; Jiran, L., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2020.
  • Zpráva o měření zbytkových napětí 2020 – Pitrmuc, Z.; Rázek, V.; Novák, P., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2020.

2019

  • Optimalizace laserového svařování nerezových ocelí v roce 2019 – Pitrmuc, Z.; Sommer, J.; Slaný, M., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2019.
  • Zpráva o měření zbytkových napětí 2019 – Pitrmuc, Z.; Rázek, V.; Novák, P., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2019.
  • Zpráva o postupu prací a dosažených výsledcích projektu FV40133 za rok 2019 – Pitrmuc, Z.; Beránek, L.; Sommer, J.; Slaný, M.; Podaný, J.; Novák, P.; Mikeš, P.; Hošek, J. et al., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2019.
  • Zpráva o postupu prací a dosažených výsledcích projektu TH03010089 za rok 2019 – Pitrmuc, Z.; Rázek, V.; Sommer, J.; Novák, P.; Urban, J.; Beránek, L.; Pala, Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2019.

2018

  • Zpráva o postupu prací a dosažených výsledcích projektu TH03010089 za rok 2018 – Pitrmuc, Z.; Rázek, V.; Sommer, J.; Novák, P.; Urban, J.; Beránek, L.; Pala, Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2018.
  • Zpráva o postupu prací a dosažených výsledcích za rok 2018 – Pitrmuc, Z.; Beránek, L.; Rázek, V.; Šimota, J.; Pala, Z., [Research Report] 2018.
  • Odborná zpráva o průběhu projektu za rok 2018 – Pitrmuc, Z.; Kellner, T.; Urban, J.; Šimota, J.; Sommer, J.; Pelikán, L.; Andronov, V., [Research Report] 2018.

2017

  • Optimalizace laserového svařování nerezových ocelí v roce 2018 – Pitrmuc, Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2017.
  • Zpráva o měření zbytkových napětí 2018 – Pitrmuc, Z.; Rázek, V.; Novák, P., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2017.
  • Odborná zpráva o postupu prací a dosažených výsledcích za rok 2017 – Beránek, L.; Kyncl, J.; Pitrmuc, Z.; Vyskočil, Z., [Research Report] Velká Bíteš: PBS Velká Bíteš, 2017.
  • Zpráva o postupu prací a dosažených výsledcích za rok 2017 – Pitrmuc, Z.; Beránek, L.; Šimota, J.; Mikeš, P.; Pala, Z.; Rázek, V., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2017. Report no. TH01011405-PZ-2017.
  • Optimalizace laserového svařování nerezových ocelí – Pitrmuc, Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2017.
  • Zpráva o měření zbytkových napětí 2017 – Pitrmuc, Z.; Rázek, V.; Novák, P., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2017.
  • Odborná zpráva o průběhu projektu za rok 2017 – Pitrmuc, Z.; Šimota, J.; Urban, J.; Pelikán, L.; Slaný, M.; Kellner, T.; Rajal, J.; Savinov, A., [Research Report] 2017.

2016

  • Zpráva o měření zbytkových napětí 2016 – Pitrmuc, Z.; Rázek, V.; Novák, P., [Research Report] GE Aviation, 2016.
  • Optimalizace laserového svařování nerezových ocelí – Pitrmuc, Z.; Savinov, A., [Research Report] Attl a spol. s.r.o. Továrna na stroje, 2016.
  • Odborná zpráva o průběhu projektu za rok 2016 – Kyncl, J.; Brajer, J.; Mašek, P.; Šimota, J.; Urban, J.; Kellner, T.; Pitrmuc, Z., [Research Report] 2016.

2015

  • Výzkumná zpráva o možnostech odstranění HVOF nástřiků prostřednictvím elektrolytického rozpouštění – Pitrmuc, Z., [Research Report] 2015.
  • Zařízení pro vysokocyklové únavové zkoušky lopatek a Metodika testování lopatek blisku 1. stupně – Pitrmuc, Z.; Roun, J.R.; Vilímek, T.V.; Gergely, V.G., [Research Report] Praha: GE Aviation Czech, 2015.
  • Zpráva o postupu prací a dosažených výsledcích za rok 2015 – Pitrmuc, Z.; Beránek, L.; Rázek, V.; Mikeš, P.; Kolařík, L.; Gergely, V. G.; Ziegelheim, J. Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2015.
  • Zpráva o měření zbytkových napětí 2015 – Rázek, V.; Kafka, J.; Pitrmuc, Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2015.

2014

  • Analytické činnosti v oblasti integrity povrchu a měření zbytkových napětí – Barcal, J.; Beránek, L.; Mikeš, P.; Pitrmuc, Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2014.
  • Zpráva o měření zbytkových napětí 2014 – Rázek, V.; Kafka, J.; Pitrmuc, Z., [Research Report] Praha: CTU FME. Department of Machining, Process Planning and Metrology, 2014.

Poloprovoz, ověřěná technologie, odrůda, plemeno

2020

  • Technologie progresivního dokončování kritických dílů kompresoru TH03010089-V001 – Pitrmuc, Z.; Beránek, L.; Urban, J.; Sommer, J.; Pala, Z., [Verified Technology] 2020.

2018

  • Ověření účinku technologie zpevňování na povrchovou vrstvu a zvýšení životnosti lopatek – Pitrmuc, Z.; Beránek, L.; Slaný, M.; Sommer, J.; Pala, Z.; Gergely, V., [Verified Technology] 2018.

2017

  • REPAIR INTRO TO H80 COMPRESSOR AIRFOILS – Pitrmuc, Z.; Beránek, L.; Šimota, J.; Stawarz, S.; Lorek, M.; Pala, Z.; Gergely, V.; Bouchaud, B., [Verified Technology] 2017.

2016

  • Silové broušení tvarových ploch superslitin – Pitrmuc, Z.; Šimota, J.; Beránek, L.; Kyncl, J.; Vyskočil, Z, [Verified Technology] 2016.

Ostatní nezařazené

2019

  • Machining of shaped surfaces on workpieces produced by DMLS – Pelikán, L.; Pitrmuc, Z.; Šimota, J.; Slaný, M.; Sommer, J.; Andronov, V.; Beránek, L., Manufacturing Technology: Journal for Science, Research and Production. 2019, ISSN 1213-2489.