Department of Process Engineering

CZ   / EN  


  • mixing device (from laboratory models to the pilot unit with volumes of 6-1000 litres)
  • pilot high volume mixing apparatus with side mixer (volume 3000 litres)
  • laboratory fermenter with a capacity of 35 litres, , analysis of process parameters (temperature, pressure, pH), production and quality of biogas (CO2 , CH4 , H2 , O2).
  • equipment for hydrothermal pre-treatment of raw materials – units of thermal and thermal-expansion pre-treatment for processing batch with a volume of 0.5-8 litres at a maximum temperature of 200 °C and a pressure of 1.55 Mpa
  • hydraulic test track for heat exchangers – the maximum flow rate of 50 m3/h, pressure loss measurements of components and parts embedded with a differential manometer
  • convective circulation drier with the possibility of modifying drying in a fluidized bed using hot air at a maximum temperature of 80 °C and a speed of 2 m/sec.
  • Anhydro spray dryer.
  • Laser particle size analyzer FRITSCH "Analyse A22" COMPACT with ultrasonic dispersing unit. Analysis of particle size in the range of 0,3-300 microns.
  • Optical microscopy.
  • Rotational rheometry RHEOTEC RC 20 for measuring the viscosity in the range of 1 to 32000 mPas, shear stresses from 0 - 206 Pa and a shear speed of 4-4000 1/s.
  • Measurements of thermal conductivity of solid and powder materials using Kemtherm QTM 4 analyzer.
  • Equipment for ohmic and microwave heating.