[design/2014/cvut-logo-blue.png]
CZ / EN

Ústav mechaniky, biomechaniky a mechatroniky

CZ   / EN  

Lidé

Matej Daniel

prof. RNDr. Matej Daniel, Ph.D.

matej.daniel (zavináč) cvut.cz

vedoucí / odbor biomechaniky / Fakulta strojní
člen grémia / Fakulta strojní
člen vědecké rady / Fakulta strojní

420776273792
(22 435) 2518

místnost: B1-610, Dejvice

Navigace

Další informace můžete nalézt v centrální databázi. V3S.

Granty

  •  
    Aplikace smart funkce v individuálních náhradách velkých kloubů – Daniel, M. (2021-2023)
  • SGS22/149/OHK2/3T/12  
    Výzkum a vývoj metod a aplikací pro diagnostickou a terapeutickou biomechaniku – Daniel, M. (2022-2024)
  • TM02000060  
    Aplikovaný výzkum konstrukčních principů a vývoj aditivní výroby multimateriálových zdravotnických prostředků – Daniel, M. (2021-2024)
  • TM02000084  
    Aplikovaný výzkum a vývoj náhrad malých kloubů s dlouhou životností využitím přímého 3D tisku titanové slitiny – Daniel, M. (2021-2023)
  • SGS19/155/OHK2/3T/12  
    Biomechanika - sběr dat, validace a aplikace – Daniel, M. (2019-2021)
  • TF02000067  
    3D tisk implantátů s vysokou přidanou hodnotou - spolehlivost, účinnost, indvidualita – Daniel, M. (2016-2019)
  • NV15-33629A  
    Vývoj inovativních biotribologických prostředků pro obnovení mezní lubrikace. – Daniel, M. (2015-2018)
  • NV15-31269A  
    Studium nových materiálů pro artikulační povrchy kloubních náhrad – Daniel, M. (2015-2019)
  • GA16-14758S  
    Vliv nanotopografie povrchu na bioaktivní vlastnosti titanové slitiny s nízkým modulem pružnosti. – Daniel, M. (2016-2018)
  • SGS16/207/OHK2/3T/12  
    Biomechanika člověka - od buněk k náhradám – Daniel, M. (2016-2018)
  • MEB091143  
    Nanomechanika a elektrostatika interakcí mezi implantáty a živými tkáněmi – Daniel, M. (2011-2012)
  • TA01010185  
    Nové materiály a povrchové vrstvy pro bionický návrh kloubních náhrad – Daniel, M. (2011-2014)
  • MEB090902  
    Klinicky orientována biomechanická analýza fraktur acetabula – Daniel, M. (2009-2010)
  • MEB090613  
    Klinicky orientována biomechanická analýza aseptické nekrózy hlavice femuru – Daniel, M. (2008)
  • KONTAKT 9-06-13  
    Biomechanics of femoral Head Necrosis – Daniel, M. (2007)
  • CTU0303512  
    Matematický model zatížení lumbální páteře – Daniel, M. (2003)

Článek v periodiku

2024

  • Intra and inter-rater variability in the construction of patient-specific musculoskeletal model – Votava, J. - Kratochvíl, A., - Daniel, M., Gait & Posture. 2024, 108 195-198. ISSN 0966-6362.

2023

  • Reply to the comments on the letter of Peets et al. titled "Comment on solitons in the Heimburg-Jackson model of sound propagation in lipid bilayers are enabled by dispersion of a stiff membrane" by Drab et al – Drab, M. - Daniel, M. - Kralj-Iglic, V., - Iglic, A., The European Physical Journal E. 2023, 46(6), 38-39. ISSN 1292-8941.
  • Microstructure and mechanical properties evolution of Ti-13Nb-13Zr alloy processed by ECAP-Conform and rotary swaging – Xu, H. Q. - Wei, K. X. - Wei, W. - Dzugan, J., - Daniel, M., Journal of Alloys and Compounds. 2023, 969 0925-8388-0925-8400. ISSN 0925-8388.
  • Reconstruction with a double-constrained implant design after complex shoulder extra-articular resection – Lesensky, J. - Belzarena, A. C., - Daniel, M., World Journal of Surgical Oncology. 2023, 21(1), 1-9. ISSN 1477-7819.
  • Development and Mechanical Testing of Implant for Cranial Reconstruction After Burr Hole Trepanation – Bodnárová, J. - Kratochvíl, A., - Daniel, M., Journal of Medical Devices. 2023, 17(3), ISSN 1932-619X.
  • NONLINEAR CELL DEFORMATION MODEL – Mendová, K. - Daniel, M., - Otáhal, M., Strojnícky časopis. 2023, 2023 ISSN 2450-5471.
  • Development of Smart Sensing Film with Nonbiofouling Properties for Potentiometric Detection of Local pH Changes Caused by Bacterial and Yeast Infections Around Orthopedic Implants – Tomšík, E. - Gunár, K. - Kunclová, T. - Ivanko, I. - Trousil, J. - Hybášek, V. - Daniel, M. - Šepitka, J. - Judl, T. - Jahoda, D. - Hrubý, M., - Fojt, J., Advanced Materials Interfaces. 2023, 10(5), 1-10. ISSN 2196-7350.

2022

  • Impact of the COVID-19 pandemic on orthopaedic and traumatological care in Prague, the capital of the Czech Republic – Fulin, P. - Daniel, M. - Walder, J., - Grzelecki, D., PLoS ONE. 2022, 17(6), ISSN 1932-6203.
  • Additive Manufacturing of Honeycomb Lattice Structure—From Theoretical Models to Polymer and Metal Products – Goldmann, T. - Huang, W.Ch. - Rzepa, S. - Džugan, J. - Sedláček, R., - Daniel, M., Materials. 2022, 2022(15), ISSN 1996-1944.

2021

  • Ultra-short cementless anatomical stem for intracapsular femoral neck fractures in patients younger than 60 years – Melisik, M. - Hrubina, M. - Daniel, M. - Cibula, Z. - Rovnak, M., - Necas, L., Acta Orthopaedica Belgica. 2021, 87(4), 619-627. ISSN 0001-5512.
  • MECHANICAL PROPERTIES OF ANODIC TITANIUM DIOXIDE NANOSTRUCTURES – Kulkarni, M. - Šepitka, J. - Junkar, I. - Bencina, M., - Daniel, M., Materials and Technology. 2021, 55(1), 19-24. ISSN 1580-3414.
  • A new insight into more effective viscosupplementation based on the synergy of hyaluronic acid and phospholipids for cartilage friction reduction – Daniel, M. - Mendová, K. - Eleršič Filipič, K. - Vrbka, M. - Hilšer, P., - Suchánková, A., Biotribology. 2021, 25(2352-5738), ISSN 2352-5738.

2020

  • Aspects of Selective Laser Melting Technology Considered in the Preparation of Trabecular Structures for Bone Tissue Substitution – Roudnicka, M. - Vojtech, D., - Daniel, M., Manufacturing Technology. 2020, 20(4), 507-515. ISSN 1213-2489.
  • Correlation between adhesion strength and phase behaviour in solid-supported lipid membranes – Bibissidis, N. - Betlem, K. - Cordoyiannis, G. - Prista-von Bonhorst, F., - Daniel, M., Journal of Molecular Liquids. 2020, 320 ISSN 1873-3166.
  • Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4 V Porous Structure for Biomedical Application – Pehlivan, E. - Džugan, J. - Fojt, J. - Sedláček, R. - Rzepa, S., - Daniel, M., Materials. 2020, 13 ISSN 1996-1944.
  • Build Size and Orientation Influence on Mechanical Properties of Powder Bed Fusion Deposited Titanium Parts – Mertová, K. - Džugan, J. - Roudnická, M. - Daniel, M. - Vojtěch, D. - Seifi, M., - Lewandowski, J.J., Metals — Open Access Metallurgy Journal. 2020, 10 1-19. ISSN 2075-4701.
  • Effects of build orientation and sample geometry on the mechanical response of miniature CP-Ti Grade 2 strut samples manufactured by laser powder bed fusion – Pehlivan, E. - Roudnícká, M. - Džugan, J. - Koukoliková, M. - Králík, V. - Seifi, M. - Lewandowski, J.J. - Dalibor, V., - Daniel, M., ADDITIVE MANUFACTURING. 2020, 35 1-10. ISSN 2214-8604.
  • Quantum Dot-Driven Stabilization of Liquid-Crystalline Blue Phases – Kordogiannis, G. - Lavrič, M. - Trček, M. - Tzitzios, V. - Lelidis, I. - Nounesis, G. - Daniel, M., - Kutnjak, Z., Frontiers in Physics. 2020, 8(-), 1-8. ISSN 2296-424X.
  • In vitro evaluation of a novel nanostructured Ti-36Nb-6Ta alloy for orthopedic applications – Voltrova, B. - Jarolimova, P. - Hybasek, V. - Blahnova, V. - Šepitka, J. - Matějka, R., - Daniel, M., Nanomedicine. 2020, 15(19), 1843-1859. ISSN 1743-5889.
  • The role of vascularization on changes in ligamentum flavum mechanical properties and development of hypertrophy in patients with lumbar spinal stenosis – Ježek, J. - Šepitka, J. - Daniel, M. - Kujal, P. - Blanková, A. - Waldauf, P. - Krbec, M. - Dousa, P. - Skala-Rosenbaum, J. - Samal, F., - Jirasek, T., The Spine Journal. 2020, 20(7), 1125-1133. ISSN 1529-9430.
  • Blue phase stabilization by CoPt-decorated reduced-graphene oxide nanosheets dispersed in a chiral liquid crystal – Lavrič, M. - Cordoyiannis, G. - Tzitzios, V. - Lelidis, I. - Kralj, S. - Nounesis, G. - Žumer, S. - Daniel, M., - Kutnjak, Z., Journal of Applied Physics. 2020, 127 095101-1-095101-6. ISSN 0021-8979.

2019

  • Cementless hip arthroplasty and transverse shortening femoral osteotomy with the S-ROM stem for Crowe type IV developmental dysplasia. – Necas, L. - Hrubina, M. - Melisik, M. - Cibula, Z. - Chmurny, M. - Daniel, M., - Steno, B., European Journal of Orthopaedic Surgery and Traumatology. 2019, 29(5), 1025-1033. ISSN 1432-1068.
  • Different diameters of titanium dioxide nanotubes modulate Saos-2 osteoblast-like cell adhesion and osteogenic differentiation and nanomechanical properties of the surface – Voltrova, B. - Hybasek, V. - Blahnova, V. - Šepitka, J. - Matějka, R., - Daniel, M., RSC Advances. 2019, 9(20), 11341-11355. ISSN 2046-2069.

2018

  • Clustering and separation of hydrophobic nanoparticles in lipid bilayer explained by membrane mechanics – Daniel, M. - Řezníčková, J. - Handl, M. - Iglic, A., - Kralj-Iglič, V., Scientific Reports. 2018, 8 1-7. ISSN 2045-2322.
  • Influence of Inherent Surface and Internal Defects on Mechanical Properties of Additively Manufactured Ti6Al4V Alloy: Comparison between Selective Laser Melting and Electron Beam Melting – Fousova, M. - Vojtech, D. - Doubrava, K. - Daniel, M., - Lin, C.F., Materials. 2018, 11(4), ISSN 1996-1944.
  • A human pericardium biopolymeric scaffold for autologous heart valve tissue engineering: cellular and extracellular matrix structure and biomechanical properties in comparison with a normal aortic heart valve – Straka, F. - Schornik, D. - Masin, J. - Filova, E. - Mirejovsky, T. - Burdikova, Z. - Svindrych, Z. - Chlup, H. - Horný, L. - Daniel, M. - Machac, J. - Skibová, J. - Pirk, J., - Bacakova, L., Journal of Biomaterials Science, Polymer Edition. 2018, 29(6), 599-634. ISSN 0920-5063.

2017

  • Magnification of digital hip radiographs differs between clinical workplaces – Hornová, J. - Růžička, P. - Hrubina, M. - Stastny, E. - Košková, A. - Fulín, P. - Gallo, J., - Daniel, M., PLoS ONE. 2017, 12(11), ISSN 1932-6203.
  • Identification of the critical level of implantation of an osseointegrated prosthesis for above-knee amputees. – Andrango Castro, E. - Konvičková, S. - Daniel, M., - Horák, Z., Computer Methods in Biomechanics and Biomedical Engineering. 2017, 27(14), 1494-1501. ISSN 1025-5842.
  • Biomechanical analysis of local and global strengthening of gluteus medius – Daniel, M. - Hornová, J. - Doubrava, K., - Tomanová, M, TURKISH JOURNAL OF PHYSICAL MEDICINE AND REHABILITATION. 2017, 63(3), 283-285. ISSN 2587-0823.
  • Effect of patient-specific model scaling on hip joint reaction force in one-legged stance – study of 356 hips – Hornová, J. - Iglič, A - Kralj-Iglič, V - Pedersen, D.R., - Daniel, M., Acta of Bioengineering and Biomechanics. 2017, 19(4), 103-108. ISSN 1509-409X.
  • Biomechanical analysis of INFINITY rehabilitation method for treatment of low back pain – Daniel, M. - Tomanová, M - Hornová, J. - Novotná, I., - Lhotská, L., Journal of Physical Therapy Science. 2017, 29(5), 832-838. ISSN 0915-5287.

2016

  • Patient-specific hip geometry has greater effect on THA wear than femoral head size – Daniel, M. - Rijavec, B. - Dolinar, D. - Pokorny, D. - Iglič, A., - Kralj-Iglič, V., Journal of Biomechanics. 2016, 49(16), 3996-4001. ISSN 0021-9290.

2015

  • Effect of cup inclination on predicted contact stress-induced volumetric wear in total hip replace – Rijavec, B. - Kosak, R. - Daniel, M. - Kralj-Iglic, V., - Dolinar, D., Computer Methods in Biomechanics and Biomedical Engineering. 2015, 18(13), 1468-1473. ISSN 1025-5842.

2014

  • Energy of Quantum Dots Encapsulated in Biological Membrane – Daniel, M. - Řezníčková, J., Procedia Engineering. 2014, C(79), 137-142. ISSN 1877-7058.
  • Type of Attachment of Cartilage in Synovial Joint Can Set Apart Articular Cartilage and Fibrocartilage – Numerical Plowing Loading Analysis – Čadová, M. - Daniel, M., - Gallo, L.M., Russian journal of biomechanics. 2014, 18(3), 283-289. ISSN 1812-5123.
  • Studying the influence of nanodiamonds over the elasticity of polymer/nanodiamond composites for biomedical application – Hikov, T. - Mitev, D. - iglic, A. - Presker, R. - Daniel, M. - Šepitka, J. - Krasteva, N. - Keremidarsk, M. - Cvetanov, I. - Pramatarova, L., - Radeva, E., Journal of Physics: Conference Series. 2014, 1(558), 1-6. ISSN 1742-6588.
  • Boundary cartilage lubrication: review of current concepts – Daniel, M., Wiener Medizinische Wochenschrift. 2014, 164(5-6), 88-94. ISSN 0043-5341.
  • Limiting extensibility constitutive model with distributed fibre orientations and ageing of abdominal aorta – Horný, L. - Netušil, M., - Daniel, M., Journal of the Mechanical Behavior of Biomedical Materials. 2014, 38 39-51. ISSN 1751-6161.
  • A comparative study of muscle force estimates using Huxley's and Hill's muscle model – Čadová, M. - Vilímek, M., - Daniel, M., Computer Methods in Biomechanics and Biomedical Engineering. 2014, 17(4), 311-317. ISSN 1025-5842.

2013

  • Boundary cartilage lubrication: review of current concepts – Daniel, M., Wiener Medizinische Wochenschrift. 2013, 164 88-94. ISSN 0043-5341.
  • Morbid Obesity May Increase Dislocation in Total Hip Patients: A Biomechanical Analysis – Elkins, J. - Daniel, M. - Pedersen, D. - Singh, B. - Yack, HJ - Callaghan, JJ, - Brown, TD, Clinical Orthopeadics and Related Research. 2013, 471(3), 971-980. ISSN 1528-1132.

2012

  • EFFECT OF GENERIC MUSCULOSKELETAL MODEL SCALING IN PREDICTING PERSONALIZED HIP JOINT LOAD – STUDY OF 368 HIPS – Daniel, M. - Kralj-Iglic, V., Journal of Biomechanics. 2012, 45(S1), 280. ISSN 0021-9290.
  • Determination of the Strength of Adhesion between Lipid Vesicles – Mareš, T. - Daniel, M. - Iglič, A. - Kralj-Iglič, V., - Fošnarič, M., The Scientific World Journal. 2012, 2012(1), 1-6. ISSN 1537-744X.

2011

  • Role of optimization criterion in static asymmetric analysis of lumbar spine load – Daniel, M., Wiener Medizinische Wochenschrift. 2011, 161(19-20), 477-485. ISSN 0043-5341.
  • Elastic deformations in hexagonal phases studied by small-angle X-ray diffraction and simulations. – Perutková, Š. - Daniel, M. - Rappolt, M. - Pabst, G. - Dolinar, G. - Kralj-Iglič, V., - Iglič, A., Physical Chemistry Chemical Physics. 2011, 13(8), 3100-3107. ISSN 1463-9076.
  • Polyethylene wear is related to patient-specific contact stress in THA. – Košak, R. - Kralj-Iglič, V. - Iglič, A., - Daniel, M., Clinical Orthopeadics and Related Research. 2011, 469(12), 3415-3422. ISSN 1528-1132.

2010

  • One-Legged Stance as a Representative Static Body Position for Calculation of Hip Contact Stress Distribution in Clinical Studies – Debevec, H. - Pedersen, DR - Iglic, A., - Daniel, M., Journal of Applied Biomechanics. 2010, 26(4), 522-525. ISSN 1065-8483.

2009

  • Simulacija porazdelitve tlaka v kolčni sklepni površini po rekonstrukciji poškodovane kolčne ponvice – Debevec, H. - Iglič, A., - Daniel, M., Electrotechnical Review. 2009, 76(3), 161-165. ISSN 0013-5852.
  • Encapsulation of Small Spherical Liposome into Larger Flaccid Liposome Induced by Human Plasma Proteins – Pavlic, J. - Mareš, T. - Bester, B. - Jasna, J. - Daniel, M., - Iglic, A., Computer Methods in Biomechanics and Biomedical Engineering. 2009, 12(2), 147-150. ISSN 1025-5842.

2008

  • Hip contact stress during normal and staircase walking: the influence of acetabular anteversion angle and lateral coverage of the acetabulum – Daniel, M. - Iglic, A., - Kralj-Iglic, V., Journal of Applied Biomechanics. 2008, 24(1), 88-93. ISSN 1065-8483.
  • Shear stress in epiphyseal growth plate is a risk factor for slipped capital femoral epiphysis – Zupanc, Z. - Krizancic, M. - Daniel, M. - Mavcic, B. - Antolic, V. - Iglic, A., - Kralj-Iglic, V., Journal of Pediatric Orthopaedics. 2008, 28(4), 444-451. ISSN 0271-6798.
  • Role of Phospholipid Asymmetry in the Stability of Inverted Hexagonal Mesoscopic Phases – Mareš, T. - Daniel, M. - Perutkova, S. - Perne, A. - Dolinar, G. - Iglic, A. - Rappolt, M., - Kralj-Iglic, V., JOURNAL OF PHYSICAL CHEMISTRY B. 2008, 51(112), 16575-16584. ISSN 1520-6106.
  • Homogenization of lipid membranes via statistical mechanics – Mareš, T. - Daniel, M., Bulletin of Applied Mechanics. 2008, 4(13), 24-33. ISSN 1801-1217.

2007

  • Mechanobiosenzory založené na biologickej membráne – Daniel, M., Bulletin of Applied Mechanics. 2007, 3(11), 72-73. ISSN 1801-1217.
  • Hydroxyapatite Porous Coating and the Osteointegration of the Total Hip Replacement – Landor, I. - Vavrik, P. - Sosna, A. - Jahoda, D. - Hahn, H., - Daniel, M., Archives of Orthopaedic and Trauma Surgery. 2007, 127(2), 81-89. ISSN 0936-8051.
  • Acetabular Loading in Active Abduction – Kristan, A. - Mavcic, B. - Cimerman, M. - Iglic, A. - Tonin, M. - Slivnik, T. - Kralj-Iglic, V., - Daniel, M., IEEE Transactions on Neural Systems and Rehabilitation Engineering. 2007, 15(2), 252-257. ISSN 1534-4320.
  • Analysis of a contact stress distribution of a hip cup – Sýkora, J. - Daniel, M., - Konvičková, S., Inžynieria Biomaterialów. 2007, 10(69-72), 2-3. ISSN 1429-7248.

2006

  • Vysvetlenie rozdielu medzi kontaktnými tlakmi v bedrovom kĺbe meranými experimentálne a určenými numericky – Daniel, M., Acta Mechanica Slovaca. 2006, 10(1), 69-72. ISSN 1335-2393.
  • Contact Stress in Hips with Osteonecrosis of the Femoral Head – Daniel, M. - Herman, S. - Dolinar, D. - Iglič, A. - Sochor, M., - Kralj-Iglič, V., Clinical Orthopeadics and Related Research. 2006, 447(6), 92-99. ISSN 1528-1132.
  • Hip Joint Reaction Force - Review – Daniel, M., Bulletin of Applied Mechanics. 2006, 2(6), 121-134. ISSN 1801-1217.

2005

  • Development of New Design of the Acetabular Component for Total Hip Replacement – Sýkora, J. - Konvičková, S., - Daniel, M., Inžynieria Biomaterialów. 2005, 8(47), 19-20. ISSN 1429-7248.
  • Biomechanical Analysis of Rotational Sugioka Osteotomy – Daniel, M., Acta Mechanica Slovaca. 2005, 9(2-A), 51-56. ISSN 1335-2393.
  • Original Formulation of the Optimisation Criterion for Inverse Dynamical Analysis – Daniel, M., Acta Mechanica Slovaca. 2005, 9(2-A), 47-50. ISSN 1335-2393.
  • The Shape of Acetabular Cartilage Optimizes Hip Contact Stress Distribution – Daniel, M. - Iglič, A., - Kralj-Iglič, A., Journal of Anatomy. 2005, 207(1), 85-91. ISSN 0021-8782.
  • Stable Shapes of Thin Anisotropic Nanostrips – Iglič, A. - Tzaphlidou, M. - Remškar, M. - Babnik, B. - Daniel, M., - Kralj-Iglič, V., Fullerenes, Nanotubes and Carbon Nanostrustures. 2005, 13(13), 183-192. ISSN 1536-383X.
  • Computer system for determination of the quantitative anatomy of musculature from CT images – Daniel, M. - Iglič, I., - Kralj-Iglič, V., Computer Methods in Biomechanics and Biomedical Engineering. 2005, 8(1), 25-29. ISSN 1025-5842.

2004

  • Analysis and Correction of the Hole-drilling Method Used for the Residual Stress Identification – Vítek, K. - Daniel, M. - Doubrava, K. - Holý, S. - Kolman, R. - Mareš, T., - Španiel, M., Materiálové inžinierstvo. 2004, 11(2), 1-4. ISSN 1335-0803.
  • Meranie kontaktných tlakov v biomechanike – Daniel, M., Medical Hypothesis. 2004, 1(3), 117-138. ISSN 0306-9877.

2003

  • Hypothesis of the Regulation of the Cartilage Activity by Mechanical Loading – Daniel, M. - Krajl-Iglič, V. - Iglič, A., - Sochor, M., Medical Hypothesis. 2003, 60(6), 936-937. ISSN 0306-9877.
  • Gradient of Contact Stress in Normal and Dysplastic of the Human Hip – Pompe, B. - Daniel, M. - Sochor, M. - Vengust, R. - Krajl-Iglic, V., - Iglic, A., Medical Engineering & Physics. 2003, 1(25), 379-385. ISSN 1350-4533.

2002

  • Mathematical estimation of stress distribution in normal and dysplastic human hips – Mavcic, B. - Pompe, B. - Antolic, V. - Daniel, M. - Iglic, A., - Kralj-Iglic, V., Journal of Orthopaedic Research. 2002, 20(5), 1025-1030. ISSN 0736-0266.
  • Mathematical Estimation of Stress Distribution in Normal and Dysplastic Human Hips – Mavčič, B. - Pompe, B. - Antolič, V. - Daniel, M. - Iglič, A., - Kralj-Iglič, V., Journal of Orthopaedic Research. 2002, 5(20), 1025-1030. ISSN 0736-0266.
  • Computer Determination of Contact Stress Distribution and Size of Weight Bearing Area in the Human Hip Joint – Iglič, A. - Kralj-Iglič, V. - Daniel, M., - Maček-Lebar, A., Computer Methods in Biomechanics and Biomedical Engineering. 2002, 5(5), 185-192. ISSN 1025-5842.

2001

  • Determination of contact hip stress from nomograms based on mathematical model – Daniel, M. - Antolic, V. - Iglic, A., - Kralj-Iglic, V., Medical Engineering & Physics. 2001, 23(5), 347-357. ISSN 1350-4533.
  • Biomechanical evaluation of hip joint after Salter innominate osteotomy: a long-term follow-up study – Vengust, R. - Daniel, M. - Antolic, V. - Zupanc, V. - Iglic, A., - Kralj-Iglic, V., Archives of Orthopaedic and Trauma Surgery. 2001, 121(9), 511-516. ISSN 0936-8051.

Stať ve sborníku

2024

  • AFM cell indentation: fluid shell model – Otáhal, M. - Mendová, K. - Vančura, M., - Daniel, M., In: Advances in Digital Health and Medical Bioengineering. Proceedings of the 11th International Conference on E-Health and Bioengineering (EHB-2023). Cham: Springer Nature Publishing AG, 2024. IFMBE PROCEEDINGS. ISSN 1680-0737.

2023

  • Mechanické vlastnosti buněk – Mendová, K. - Daniel, M. - Šepitka, J., - Otáhal, M., In: XIV. mezinárodní konference BIOIMPLANTOLOGIE. Praha: Národní knihovna ČR, 2023. ISBN 978-80-11-03134-3.
  • Design, simulation and control of a biomechanical model of the upper limb – Zoufalý, O. - Halamka, V. - Daniel, M., - Šika, Z., In: PROCEEDINGS OF COMPUTATIONAL MECHANICS 2023. Plzeň: University of West Bohemia, 2023. p. 227-229. ISBN 978-80-261-1177-1.
  • Cooperation of Passive Springs and Actuators for Energy-Efficient Exoskeletons of Upper Limb – Krivošej, J. - Daniel, M., - Šika, Z., In: MULTIBODY 2023 11th ECCOMAS Thematic Conference on Multibody Dynamics. Lisboa: Instituto de Engenharia Mecanica, 2023. ISBN 978-989-53599-2-9.
  • Energy-Efficient Control Strategy of Exoskeleton of Upper Limb – Krivošej, J. - Švadlena, J. - Daniel, M., - Šika, Z., In: PROCEEDINGS OF COMPUTATIONAL MECHANICS 2023. Plzeň: University of West Bohemia, 2023. p. 33-34. ISBN 978-80-261-1177-1.
  • AN APPROACH TO MODELLING AND CONTROL OF ENERGY-EFFICIENT UPPER LIMB EXOSKELETONS – Krivošej, J. - Švadlena, J. - Daniel, M., - Šika, Z., In: 33rd Workshop of Applied Mechanics. Praha: Czech Technical University in Prague, 2023. p. 37-40. 1. ISBN 978-80-01-07267-7.
  • Vývoj kraniotomických implantátů s využitím metody aditivní výroby – Bodnárová, J. - Kratochvíl, A., - Daniel, M., In: Human Biomechanics 2023 – Sborník. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2023. ISBN 978-80-01-07179-3.
  • Pasivní odezva svalové tkáně u pacientů s reverzní náhradou glenohumerálního kloubu – Kratochvíl, A. - Daniel, M. - Fulín, P., - Walder, J., In: Biomateriály a jejich povrchy XVI.. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2023. 1.. ISBN 978-80-01-07212-7.
  • Biomechanika reverzní náhrady ramenního kloubu – Kratochvíl, A. - Daniel, M., In: Human Biomechanics 2023 – Sborník. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2023. ISBN 978-80-01-07179-3.
  • EXPERIMENTAL VALIDATION OF MOTION SENSOR PHYSILOG® 5 APPLIED TO SHOULDER JOINT – Krivošej, J. - Garanová Krišťáková, J. - Daniel, M., - Šika, Z., In: Vol. 42 (2023): 18th Youth Symposium on Experimental Solid Mechanics. Praha: Czech Technical University in Prague, 2023. p. 55-60. vol. 42. ISSN 2336-5382. ISBN 978-80-01-07237-0.
  • Změna kinematiky a dynamiky chůze u pacientů s dětskou mozkovou obrnou – Zoufalý, O. - Rzepa, S. - Daniel, M., - Bešťák, J., In: Human Biomechanics 2023 – Sborník. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2023. p. 14-16. ISBN 978-80-01-07179-3.
  • OPTIMIZATION OF A 3D PRINTED ANKLE-FOOT-ORTHOSIS – Zoufalý, O. - Mendová, K., - Daniel, M., In: 24th International Scientific Conference APPLIED MECHANICS 2023 BOOK OF ABSTRACTS. Bratislava: Strojnícka fakulta STU v Bratislave, 2023. p. 137-138. ISBN 978-80-227-5294-7.
  • Metoda stanovení změn ve svalově-kosterní geometrii u pacientů s reverzní náhradou ramenního kloubuMetoda stanovení změn ve svalově-kosterní geometrii u pacientů s reverzní náhradou ramenního kloubu – Kratochvíl, A. - Daniel, M. - Fulín, P., - Walder, J., In: XIV. mezinárodní konference BIOIMPLANTOLOGIE. Praha: Národní knihovna ČR, 2023. ISBN 978-80-11-03134-3.
  • 2v1: Lipozóm ako model bunky/nosič liečiv? – Mendová, K. - Daniel, M. - Otáhal, M., - Vrbka, M., In: Human Biomechanics 2023 – Sborník. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2023. p. 7. ISBN 978-80-01-07179-3.
  • EXPERIMENTAL AND ANALYTICAL EVALUATION OF THE BIOMECHANICS OF LIPOSOMES – Mendová, K. - Daniel, M. - Šepitka, J., - Otáhal, M., In: 24th International Scientific Conference APPLIED MECHANICS 2023 BOOK OF ABSTRACTS. Bratislava: Strojnícka fakulta STU v Bratislave, 2023. p. 79-80. ISBN 978-80-227-5294-7.
  • MECHANICS OF STABILIZATION IN REVERSE SHOULDER ARTHROPLASTY – Kratochvíl, A. - Daniel, M. - Votava, J. - Pokorný, D., - Fulín, P., In: 24th International Scientific Conference APPLIED MECHANICS 2023 BOOK OF ABSTRACTS. Bratislava: Strojnícka fakulta STU v Bratislave, 2023. ISBN 978-80-227-5294-7.

2021

  • Znižujú lipozómy súčiniteľ trenia v chrupavke? – Mendová, K. - Daniel, M. - Vrbka, M., - Hilšer, P., In: Biomateriály a jejich povrchy XIV.. Praha: Czech Technical University in Prague, 2021. p. 9-92. 1. ISBN 978-80-01-06872-4.
  • Experimental evaluation of liposomes biomechanics – Mendová, K. - Daniel, M. - Otáhal, M., - Šepitka, J., In: 29th WORKSHOP OF APPLIED MECHANICS BOOK OF PAPERS. Praha: CTU FME. Department of Mechanics, Biomechanics and Mechatronics, 2021. ISBN 978-80-01-06909-7.
  • X-RAY MAGNIFICATION OF THE SHOULDER JOINT – Kratochvíl, A. - Daniel, M. - Fulín, P., - Pokorný, D., In: 29th WORKSHOP OF APPLIED MECHANICS BOOK OF PAPERS. Praha: CTU FME. Department of Mechanics, Biomechanics and Mechatronics, 2021. p. 30-33. ISBN 978-80-01-06909-7.

2020

  • Vplyv lipozómov na súčiniteľ trenia v synoviálnych kĺboch – Mendová, K. - Daniel, M., - Vrbka, M., In: Biomateriály a jejich povrchy XIII.. Praha: Czech Technical University in Prague, 2020. ISBN 978-80-01-06754-3.
  • ANALYSIS OF DISPLACEMENT OF CENTER OF ROTATION DURING REVERSE SHOULDER ARTHROPLASTY – Kratochvíl, A. - Daniel, M., - Fulín, P., In: 28th WORKSHOP OF APPLIED MECHANICS BOOK OF PAPERS. Praha: Czech Technical University in Prague, 2020. p. 42-44. ISBN 978-80-01-06791-8.

2019

  • Biomechanics of scapulohumeral rhythm and force in shoulder joint – Votava, J. - Daniel, M., - Tomanová, M., In: 26th Workshop of Applied Mechanics. Praha: ČVUT v Praze, Fakulta strojní, Ústav mechaniky, biomechaniky a mechatroniky, 2019. ISBN 978-80-01-06604-1.
  • Influence of the scapulohumeral rhythm on the shoulder joint force – Votava, J. - Daniel, M., - Tomanová, M., In: Book of abstracts of the 4th International Conference on Movement Analysis. Kladno: České vysoké učení technické v Praze, Fakulta biomedicínského inženýrství, 2019. ISBN 978-80-01-06587-7.
  • Biomechanical explanation of the scapulohumeral rhythm – Votava, J. - Daniel, M., - Tomanová, M., In: Proceedings of the 25th Congress of the European Society of Biomechanics. Wien: TU Wien, 2019. ISBN 978-3-903024-96-0.
  • PROTOCOL OF PRODUCTION OF CELL SIZED LIPOSOMES USING MICROFLUIDIC DEVICE AND THE EFFECT OF PLASMA TREATED GLASS ON LIPOSOMES FIXATION – Mendová, K. - Eleršič Filipič, K., - Daniel, M., In: 27th Workshop of Applied Mechanics - Proceedings. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2019. ISBN 978-80-01-06680-5.
  • SYSTEM FOR LONG-TERM MONITORING OF PATIENTS WITH SHOULDER DISEASE – Kratochvíl, A. - Daniel, M., In: Proceedings of the 25th Congress of the European Society of Biomechanics. Wien: TU Wien, 2019. p. 601. ISBN 978-3-903024-96-0.
  • SYSTEM FOR DIRECT VELOCITY MEASURING – Kratochvíl, A. - Daniel, M., In: 26th Workshop of Applied Mechanics. Praha: ČVUT v Praze, Fakulta strojní, Ústav mechaniky, biomechaniky a mechatroniky, 2019. ISBN 978-80-01-06604-1.
  • WEARABLE DEVICE FOR MEASURING ACCELERATIONS AND VELOCITY – Kratochvíl, A. - Daniel, M., In: Book of abstracts of the 4th International Conference on Movement Analysis. Kladno: České vysoké učení technické v Praze, Fakulta biomedicínského inženýrství, 2019. p. 20-21. ISBN 978-80-01-06587-7.
  • MECHANICAL PROPERTIES OF PHOSPHOLIPID LAYERS – Mendová, K. - Šepitka, J., - Daniel, M., In: 26th Workshop of Applied Mechanics. Praha: ČVUT v Praze, Fakulta strojní, Ústav mechaniky, biomechaniky a mechatroniky, 2019. ISBN 978-80-01-06604-1.
  • Can be minimization of membrane bending energy used for simulation of the nanoparticle-cell interaction? – Otáhal, M. - Řezníčková, J., - Daniel, M., In: World Congress on Medical Physics and Biomedical Engineering 2018. Springer Nature Singapore Pte Ltd., 2019. p. 733-737. IFMBE Proceedings. vol. 68/2. ISSN 1680-0737. ISBN 978-981-10-9038-7.

2018

  • DEVELOPMENT MICROFLUIDIC DEVICE USING ADDITIVE MANUFACTURING – Mendová, K. - Daniel, M., - Růžička, P., In: 24th WORKSHOP OF APPLIED MECHANICS - BOOK OF PAPERS. Praha: CTU FME. Division of strength and elasticity, 2018. ISBN 978-80-01-06453-5.
  • Predictors of boulder climbing performance in youth boulder climbers – Votava, J. - Daniel, M. - Otáhal, M., - Kutílek, P., In: Proceedings of the 36th International Society of Biomechanics in Sport Conference. Auckland University of Technology, 2018.

2017

  • Mechanics of Hydrophobic Nanoparticle Biomembrane Interaction – Řezníčková, J. - Handl, M. - Iglič, A. - Kralj-Iglič, V., - Daniel, M., In: COST Action CA15214 An Integrative Action for Multidisciplinary Studies on Cellular Structural Networks WORKSHOP. Praha 1: Akademie věd ČR, 2017.
  • Principles of mechanical testing of cells – Mendová, K. - Daniel, M., In: 23rd Workshop of Applied Mechanics - Proceedings. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2017. p. 20-21. ISBN 978-80-01-06372-9.
  • Tvorba lipozómov mikrofluidným zariadením – Mendová, K. - Daniel, M., In: Biomateriály a jejich povrchy X.. Praha: Czech Technical University in Prague, 2017. p. 50-51. ISBN 978-80-01-06195-4.
  • Biomechanics of Text Neck – Votava, J. - Daniel, M., - Tomanová, MT, In: Proceedings of the 23rd Congress of the European Society of Biomechanics. ESCUELA TÉCNICA SUPERIOR DE INGENIERÍA Universidad de Sevilla, 2017.
  • THE BENEFIT OF EMG IN DETERMINATION OF SHOULDER JOINT MOVEMENT PATTERNS – Kratochvíl, A. - Daniel, M., In: Proceedings of the 23rd Congress of the European Society of Biomechanics. ESCUELA TÉCNICA SUPERIOR DE INGENIERÍA Universidad de Sevilla, 2017.
  • Materials and technologies for the production of microfluidic devices – Mendová, K. - Daniel, M., In: 22nd Workshop of Applied Mechanics - Book of Papers. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2017. pp. 44-47. ISBN 978-80-01-06170-1.
  • Grater radiographic magnification of obese patients – Hornová, J. - Růžička, P. - Hrubina, M. - Šťastný, E. - Košková, A. - Fulín, P. - Gallo, J., - Daniel, M., In: 22nd Workshop of Applied Mechanics - Book of Papers. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2017. p. 25-31. ISBN 978-80-01-06170-1.
  • Influence of the choice of radiographic workplace on the radiographic magnification – Hornová, J. - Růžička, P. - Hrubina, M. - Šťastmý, E. - Košková, A. - Fulín, P. - Gallo, J., - Daniel, M., In: 22nd Workshop of Applied Mechanics - Book of Papers. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2017. p. 20-24. ISBN 978-80-01-06170-1.
  • Monitoring of shoulder joint motion activity – Kratochvíl, A. - Daniel, M., In: Studentská tvůrčí činnost 2017. Praha: ČVUT v Praze - Fakulta strojní, 2017. ISBN 978-80-01-06143-5.
  • A Mathematical Model for the Determination of Biomechanics of the Text Neck – Votava, J. - Daniel, M., - Tomanová, M., In: 22nd Workshop of Applied Mechanics - Book of Papers. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2017. p. 60-62. ISBN 978-80-01-06170-1.
  • Biomechanics of stress of the cervical spine due to use of smartphones – Votava, J. - Daniel, M., In: Studentská tvůrčí činnost 2017. Praha: ČVUT v Praze - Fakulta strojní, 2017. ISBN 978-80-01-06143-5.
  • Interaction of hydrophobic nanoparticles with a biological membrane – Řezníčková, J. - Daniel, M., In: Studentská tvůrčí činnost 2017. Praha: ČVUT v Praze - Fakulta strojní, 2017. ISBN 978-80-01-06143-5.

2016

  • HIP JOINT CENTER ESTIMATION USING GREATER TROCHANTER METHOD – CORRECTION FOR TROCHANTERIC SOFT TISSUE THICKNESS. – Daniel, M. - Hornová, J., In: Proceeding of the 2016 Annual Scientific Meeting of Taiwanese Society of Biomechanics. Taipei: Taiwanese Society of Biomechanics, 2016. pp. 121-124.
  • Hip-joint-center regression equations: correlation or offset? – Daniel, M., In: Proceedings of the Congress of the European Society of Biomechanics. Marne-la-Vallée: IFSTTAR, 2016.
  • Mechanism of Janus-like vesicles - biomechanics of hybrid nanoparticles phospholipid vesicles – Daniel, M. - Řezníčková, J., In: Proceedings of the Congress of the European Society of Biomechanics. Marne-la-Vallée: IFSTTAR, 2016.
  • AUTOMATED ALGORITHM OF MUSCLE WRAPPING BASED ON GEODESIC PATH – Votava, J. - Daniel, M., - Pokorný, D., In: Proceedings of the Congress of the European Society of Biomechanics. Marne-la-Vallée: IFSTTAR, 2016.
  • Automated algorithm of muscle wrapping based on geodesic path – Votava, J. - Daniel, M., - Pokorný, D., In: 16th Conference on Human Biomechanics 2016 – Conference proceedings. Kladno: Faculty of biomedical engineering, Department of Natural sciences, 2016. ISBN 9788001060391.
  • SYSTEM FOR DETERMINATION OF SHOULDER JOINT MOTION ACTIVITY – Kratochvíl, A. - Daniel, M., In: 21st Workshop of Applied Mechanics - Proceedings. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2016. pp. 25-28. ISBN 978-80-01-06085-8.
  • ANALYSIS OF HIP JOINT CUP WEAR – Mervart, J. - Daniel, M., - Králík, V., In: 20th Workshop of Applied Mechanics - Book of Papers. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2016. pp. 41-46. ISBN 978-80-01-05975-3.

2015

  • Stability of Phospholipid Vesicles in Joint - Mathematical Model – Řezníčková, J. - Daniel, M., In: 18th Workshop of Applied Mechanics. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. ISBN 978-80-01-05746-9.
  • Preparation of Liposomes Using a 3D Flow Focusing Microfluidic Device – Řezníčková, J. - Daniel, M., In: 19th Workshop of Applied Mechanics. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. pp. 43-45. ISBN 978-80-01-05918-0.
  • Automated Algorithm of Muscle Wrapping Based on Geodesic Path – Votava, J. - Daniel, M., - Pokorný, D., In: 19th Workshop of Applied Mechanics. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. pp. 62-65. ISBN 978-80-01-05918-0.

2014

  • Biomechanics of nanoparticles self - assembly in lipid bilayer – Řezníčková, J. - Daniel, M., In: HB 2014 Book of abstracts. Plzeň: Západočeská universita, 2014, ISBN 978-80-261-0421-6. Available from: http://www.zcu.cz/pracoviste/vyd/online/Humanic_web.pdf

2013

  • Cartilage Boundary lubrication – Theory of self-assembling nanolayers – Daniel, M., In: Proceedings of the 19th Congress of the European Society of Biomechanics. University of Patras, 2013,
  • Hjp joint reaction forceestimated using OpenSim - comparison to measured data – Hornová, J. - Daniel, M., In: Proceedings of the 19th Congress of the European Society of Biomechanics. University of Patras, 2013.

2012

  • Comparison of calculated hip joint reaction forces with experimental data – Hornová, J. - Daniel, M., In: 16th Workshop of Applied Mechanics. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2012. pp. 11. ISBN 978-80-01-05186-3.
  • Effect of patient-specific model scaling on hip joint reaction force in one-legged stance­ study of 368 hips – Daniel, M. - Hornová, J. - Iglič, A., - Kralj-Iglič, V., In: 14th Conference on Human Biomechanics. Praha: Academy of Sciences of the Czech Republic, 2012, pp. 6-7. Available from: http://epilepsy.biomed.cas.cz/hb2012

2011

  • Semiautomatic segmentation of the hip joint cartilage from MR images – Hornová, J. - Daniel, M., In: Workshop On Applied Mechanics WAM 2011. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2011. pp. 11-12. ISBN 978-80-01-04895-5.
  • POLYETHYLENE WEAR AND PATIENT SPECIFIC CONTACT STRESS IN TOTAL HIP ARTHROPLASTY – Daniel, M. - Igloč, A. - Košak, R., - Kralj-Iglič, V., In: Proceedings of 35th Annual Meeting of the American Society of Biomechanics. Los Angeles: University of California Los Angeles, 2011, pp. 148-149.

2010

  • La détermination de la pression contacte dans la hanche des images de TDM et RMN – Hornová, J. - Daniel, M., In: Studentská tvůrčí činnost 2010. Praha: ČVUT v Praze - Fakulta strojní, 2010. pp. 1-15. ISBN 978-80-01-04533-6.
  • Determination of hip joint contact pressure from CT or MR images – Hornová, J. - Daniel, M., In: Human Biomechanics 2010. Liberec: Technical University of Liberec, 2010. p. 115-120. ISBN 978-80-7372-648-5.
  • ON THE ROLE OF LIPID ANISOTROPY IN THE TRANSITION BETWEEN LAMELLAR AND INVERTED HEXAGONAL LIPID PHASES – Perutková, Š. - Daniel, M. - Iglič, A., - Kralj-Iglič, V., In: 34th Annual Meeting of the American Society of Biomechanics. Stanford: American Society of Biomechnanics, 2010. pp. 394-395.
  • PEAK CONTACT STRESS IN HUMAN HIP JOINT- BIOMECHANICS OR MECHANOBIOLOGY? – Daniel, M. - Hornová, J., - Iglič, A., In: 34th Annual Meeting of the American Society of Biomechanics. Stanford: American Society of Biomechnanics, 2010. pp. 392-393.
  • Hip joint contact stress after incongruent reduction of acetabular fracture – Daniel, M. - Iglič, A., - Pedersen, D.R., In: Human Biomechanics 2010. Liberec: Technical University of Liberec, 2010. p. 33-37. ISBN 978-80-7372-648-5.
  • Biomechanics of DNA encapsulation in phospholipid bilayer – Kryštůfek, J. - Daniel, M., - Iglič, A., In: Human Biomechanics 2010. Liberec: Technical University of Liberec, 2010. p. 160-165. ISBN 978-80-7372-648-5.

2009

  • Role of phospholipid asymmetry in stability of inverted hexagonal mesoscopic phases – Perutková, Š. - Daniel, M. - Mareš, T. - Perne, A. - Dolinar, G. - Rappolt, M. - Kralj-Iglič, V., - Iglič, A., In: Biophysical journal. Maryland Heights: Cell Press, 2009. p. 349s-350a. ISSN 0006-3495.
  • Transition between lamellar and inverted hexagonal phases in phospholipid self-assembly – Perutková, Š. - Daniel, M. - Iglič, A., - Kralj-Iglič, V., In: SLONANO 2009. University of Ljubljana, 2009. p. 71. 1.
  • Mathematical model of inverted hexagonal phase in biomembranes influenced by anisotropic constituents – Perutková, Š. - Daniel, M. - Dolinar, G. - Kralj-Iglič, V. - Rappolt, M., - Iglič, A., In: XX International Symposium on Bioelectrochemistry and Bioenergetics. Sibiu: Universitatea "Lucian Blaga", 2009. pp. 77-78. 1. ISBN 978-973-0-06663-0.
  • Stability of inverted hexagonal mesoscopic phase affected by phospholipid anisotropy – Perutková, Š. - Daniel, M. - Dolinar, G. - Kralj-Iglič, V. - Rappolt, M., - Iglič, A., In: European biophysics journal. Berlin: Elsevier, 2009. pp. S134. ISSN 0175-7571.

2008

  • Deformation energy of inverted hexagonal phase in biomembranes – Perutkova, S. - Daniel, M., In: 9th Workshop on Applied Mechanics. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2008. pp. 59-60. ISBN 978-80-01-04161-1.
  • Bioreactor for tissue cartilage engineering – Mikulenka, P. - Franta, L., - Daniel, M., In: 25th Symposium on Advances in Experimental Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2008. p. 173-174. ISBN 978-80-01-04162-8.
  • Deviation from sphericity in HII phase – Perutkova, S. - Daniel, M., In: Human Biomechanics 2008 International Conference, Extended Abstracts. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2008. pp. 101-102. ISBN 978-80-01-04163-5.
  • Patient specific model of spine loading – Daniel, M. - Novotna, D., In: Human Biomechanics 2008 International Conference, Extended Abstracts. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2008. pp. 17-18. ISBN 978-80-01-04163-5.
  • Can Mathematical Models be Used to Predict Hip Joint Peak Contact Stress in the Clinical Studies? – Daniel, M. - Konvičková, S., In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008. Chania: IFMBE, 2008. p. 734-737. ISSN 1680-0737. ISBN 978-3-540-69138-9.
  • Homogenization via statistical mechanics – Mareš, T. - Daniel, M., In: 9th Workshop on Applied Mechanics. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2008. pp. 43-44. ISBN 978-80-01-04161-1.
  • Shape prediction via homogenized lipid membrane model – Mareš, T. - Daniel, M., In: 9th Workshop on Applied Mechanics. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2008. pp. 41-42. ISBN 978-80-01-04161-1.

2007

  • Reologický model šlachy – Mareš, T. - Daniel, M., In: 8th Workshop of Applied Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007. pp. 82-83. ISBN 978-80-01-03895-6.
  • Reologie vazkoelastickych latek – Mareš, T. - Daniel, M., In: 8th Workshop of Applied Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007. pp. 79-81. ISBN 978-80-01-03895-6.
  • Reologie - nástroj k modelování měkkých tkání – Mareš, T. - Daniel, M., In: 8th Workshop of Applied Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007. pp. 83-84. ISBN 978-80-01-03895-6.
  • Deformations of lipid membrane – Daniel, M. - Mareš, T., In: 8th Workshop of Applied Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007. pp. 97-103. ISBN 978-80-01-03895-6.
  • Lipid mebrane as prestressed structure – Daniel, M. - Mareš, T., In: 8th Workshop of Applied Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007. pp. 95-96. ISBN 978-80-01-03895-6.
  • Intrinsic shapes of membrane lipids determine polymorphism of lipid structures – Daniel, M. - Mareš, T., In: 8th Workshop of Applied Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007. pp. 91-94. ISBN 978-80-01-03895-6.
  • Self assembly of biological membrane - water and oil interface – Daniel, M. - Mareš, T., In: 8th Workshop of Applied Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007, pp. 87-90. ISBN 978-80-01-03895-6. Available from: http://bulletin-am.fsid.cvut.cz/WAM/
  • Models of biological membrane - overview – Daniel, M. - Mareš, T., In: 8th Workshop of Applied Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007. pp. 84-86. ISBN 978-80-01-03895-6.
  • Effect of abduction exercises on the spatial distribution of the acetabular load – Konvičková, S. - Daniel, M., In: Proceedings of the 12th World Congress of the International Society for Prosthetics and Orthotics. Vancouver: Canadian National Society for Prosthetics and Orthotics, 2007, pp. 399. ISBN 978-0-9783908-0-8. Available from: http://www.ispo.ca/congress/scientific.html
  • Mechanobiology of the cartilage - mathematical model – Daniel, M., In: Winter Workshop of Applied Mechanics. Praha: Nakladatelství ČVUT, 2007, pp. 33-34. ISBN 978-80-01-03710-2. Available from: http://bulletin-am.fsid.cvut.cz/WAM

2006

  • Biomechanics of the Reconstruction of Posterior Wall Fracture of Acetabulum – Daniel, M., In: Summer Workshop of Applied Mechanics 2006. Praha: Fakulta strojní ČVUT, 2006, pp. 1-2. ISBN 80-01-03453-4. Available from: http://bulletin-am.fsid.cvut.cz/WAM
  • Variations in the Hip Joint Cartilage Thickness and Stiffness Significantly Influence Hip Contact Stress Distribution – Daniel, M., In: Winter Workshop of Applied Mechanics Proceeding. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2006, pp. 35-36. ISBN 80-01-03455-0. Available from: http://bulletin-am.fsid.cvut.cz/WAM
  • Role of horse-shoe shape of facies lunata in human hip joint – Daniel, M. - Iglič, A., - Kralj-Iglič, V., In: Abstract Book - Fourth SICOT/SIROT Annual International Conference. Sydney: Societe Inter. de Chirurgie Orthopedique et de Traumatologie, 2006. pp. 122.
  • The Mechanism of Coxarthrosis in Dysplastic Hips and in Hips Subjected to AVN – Daniel, M. - Iglič, A., - Kralj-Iglič, V., In: Abstract Book - Fourth SICOT/SIROT Annual International Conference. Sydney: Societe Inter. de Chirurgie Orthopedique et de Traumatologie, 2006. pp. 30.
  • One-legged Stance - a Representative Static Body Position for the Hip Contact Stress Calculation – Daniel, M. - Iglič, A., - Kralj-Iglič, V., In: International Proceedings of 5th World Congress of Biomechanics. Bologna, Italy: MEDIMOND, 2006. p. 127-131. ISBN 88-7587-270-8.
  • The Influence of Contact Stress Distribution on Polyethylene Cup Wear – Kralj-Iglič, V. - Daniel, M. - Košak, R. - Antolič, V., - Iglič, A., In: Journal of Biomechanics, Abstracts of the 5th World Congress of Biomechanics, Munich, Germany, 29 July - 4 August 2006. Berlin: Elsevier, 2006. pp. S530. ISSN 0021-9290.
  • One-legged Stance - a Representative Body Position for the Long Term Effect of the Hip Contact Stress – Daniel, M. - Iglič, A., - Kralj-Iglič, V., In: Journal of Biomechanics, Abstracts of the 5th World Congress of Biomechanics, Munich, Germany, 29 July - 4 August 2006. Berlin: Elsevier, 2006. pp. S499. ISSN 0021-9290.
  • Differences Between the Hip Contact Stresses Measured Experimentaly and Estimated by Mathematical Models May Be Caused by Local Variations in the Cartilage Thickness and Stiffness – Daniel, M. - Iglič, A., - Kralj-Iglič, V., In: Journal of Biomechanics, Abstracts of the 5th World Congress of Biomechanics, Munich, Germany, 29 July - 4 August 2006. Berlin: Elsevier, 2006. pp. S68. ISSN 0021-9290.
  • Influence of theModification of a Geometry of a Hip Joint Cup to the Contact Stress Distribution – Sýkora, J. - Konvičková, S., - Daniel, M., In: Human Biomechanics 2006. Brno: Brno University of Technology, 2006, ISBN 80-214-3232-2.
  • Influence of theModification of a Geometry of a Hip Joint Cup to the Contact Stress Distribution – Sýkora, J. - Konvičková, S., - Daniel, M., In: Human Biomechanics 2006. Brno: VUT v Brně, Fakulta strojní, Ústav mechaniky těles, 2006. pp. 192-193. ISBN 80-214-3232-2.
  • Finite Element Analysis of the Contact Stress Distribution in New Shape of aHip Cup – Sýkora, J. - Konvičková, S., - Daniel, M., In: 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering. Cardiff: FIRST Numerics Ltd., 2006. pp. 89-91. ISBN 0-9549670-2-X.
  • The Contact Stress in New Shape of a Hip Cup – Sýkora, J. - Konvičková, S., - Daniel, M., In: Summer Workshop of Applied Mechanics 2006. Praha: Fakulta strojní ČVUT, 2006. pp. 112-113. ISBN 80-01-03453-4.
  • Potovanje točke z maksimalnim tlakom po površini acetabuluma in glavice stegnenice pri hoji in vzpenjanju po stopnicah – Mavčič, B. - Daniel, M. - Slivnik, T. - Iglič, A., - Kralj-Iglič, V., In: Fifteenth International Electrotechnical and Computer Science Conference. Ljubljana: IEEE Slovenia Section, 2006. pp. 291-293. ISSN 1581-4572.

2005

  • Modeling of a New Design of the Acetabular Component for Total Replacement of a Hip Joint – Sýkora, J. - Konvičková, S., - Daniel, M., In: The 3rd European Medical and Biological Engineering Conference - EMBEC´05. Praha: Společnost biomedicínského inženýrství a lékařské informatiky ČLS JEP, 2005. ISSN 1727-1983.
  • Using a Finite Element Method for Modeling a New Design of the Acetabular Component for Total Replacement of a Hip Joint – Sýkora, J. - Konvičková, S., - Daniel, M., In: 4th YSESM. Bologna: University of Bologna, 2005. pp. 133-134. ISBN 88-901080-2-9.
  • Development of New Design of the Acetabular Component for Total Hip Replacement – Sýkora, J. - Konvičková, S., - Daniel, M., In: Engineering of Biomaterials. Krakow: Polish Society for Biomaterials, 2005. pp. 19-20. ISBN 83-89541-51-3.
  • Influence of the thickness of the articular cartilage on the contact stress distribution in the human hip joint – Daniel, M., In: Summer Workshop of Applied Mechanics. Prague: Czech Technical University, 2005. pp. 27-31. ISBN 80-01-03200-0.
  • Semi-Analytical Mathematical Model of the Hip Joint Contact Stress Distribution in the Human Hip Joint – Daniel, M., In: Summer Workshop of Applied Mechanics. Prague: Czech Technical University, 2005. pp. 20-26. ISBN 80-01-03200-0.
  • Effects of the Variation in the Stiffness of the Human Articular Cartilage on the Hip Contact Stress Distribution – Daniel, M., In: Summer Workshop of Applied Mechanics. Prague: Czech Technical University, 2005. pp. 32-36. ISBN 80-01-03200-0.
  • Relationship Between Body Position and Hip Contact Stress During Rehabilitation Exercises – Daniel, M., In: Internationale Scientific Conference. Ostrava: VŠB Ostrava, Fakulta strojní, 2005. pp. 21-22. ISBN 80-248-0889-7.

2004

  • Biomechanical Analysis of the Acetabular Cartilage Shape – Daniel, M., In: New Approaches in Morphology, 42nd Congress of the Slovak Anatomical Society with International Participation. Košice: P.J.Šafárik University, 2004. pp. 14-15. ISBN 80-7097-554-7.
  • Structure of the Articular Cartilage in the Human Hip is Optimised to Sustain Load – Daniel, M. - Kralj-Iglič, V. - Iglič, A., - Konvičková, S., In: Slovak Biophysical Symposium - book of abstracts. Košice: Slovak Biophysical Society, 2004. pp. 50-51.
  • Mathematical Analisys of Contact Stress in a Human Hip Joint – Sýkora, J. - Konvičková, S. - Daniel, M. - Goldmann, T., - Sochor, M., In: Slovak Biophysical Symposium - book of abstracts. Košice: Slovak Biophysical Society, 2004. pp. 74-75.
  • Computer Geometric Model of the Lumbal Spine – Růžička, P. - Daniel, M., In: Biomechanics of Man 2004. Plzeň: Západočeská universita, 2004. pp. 532-536. ISBN 80-7043-315-9.
  • New Type of the Optimisation Function for Inverse Dynamics – Daniel, M., In: Biomechanics of Man 2004. Plzeň: Západočeská universita, 2004. pp. 451-454. ISBN 80-7043-315-9.
  • Biomechanical Analysis of Femoral Head Osteotomy – Daniel, M. - Kraj-Iglič, V., - Iglič, A., In: Biomechanics of Man 2004. Plzeň: Západočeská universita, 2004. pp. 87-95. ISBN 80-7043-315-9.
  • Computer System for Visualisation of the Musculoskeletal System – Daniel, M., In: Biomechanics of Man 2004. Plzeň: Západočeská universita, 2004. pp. 80-86. ISBN 80-7043-315-9.
  • New Design of the Acetabular Component for Total Hip Replacement – Daniel, M. - Sýkora, J. - Goldmann, T., - Konvičková, S., In: Biomechanics of Man 2004. Plzeň: Západočeská universita, 2004. pp. 455-456. ISBN 80-7043-315-9.
  • Mathematical Analysis of Contact Stress in a Human Hip Point and FEM Modeling – Sýkora, J. - Konvičková, S., - Daniel, M., In: Biomechanics of Man 2004. Plzeň: Západočeská universita, 2004. pp. 541-548. ISBN 80-7043-315-9.
  • Matematické modelování kontaktních tlaků v kyčelním kloubu – Sýkora, J. - Konvičková, S. - Sochor, M. - Daniel, M., - Goldmann, T., In: Summer Workshop of Applied Mechanics - Book of Abstracts. Praha: ČVUT FS, Ústav mechaniky, 2004. pp. 314-324. ISBN 80-01-02958-1.
  • Contact Stresses in the Hip Joint - Overview – Daniel, M., In: Summer Workshop of Applied Mechanics - Book of Abstracts. Praha: ČVUT FS, Ústav mechaniky, 2004. pp. 95-104. ISBN 80-01-02958-1.
  • Quantification of the Original Physiologically Based Optimisation Criterion – Daniel, M., In: Summer Workshop of Applied Mechanics - Book of Abstracts. Praha: ČVUT FS, Ústav mechaniky, 2004. pp. 90-94. ISBN 80-01-02958-1.
  • Sensitivity of the Hip Joint Reaction Force on the Choice of the Optimisation Criterion – Daniel, M., In: Summer Workshop of Applied Mechanics - Book of Abstracts. Praha: ČVUT FS, Ústav mechaniky, 2004. pp. 75-89. ISBN 80-01-02958-1.
  • Hip Joint Reaction Force - Review – Daniel, M., In: Summer Workshop of Applied Mechanics - Book of Abstracts. Praha: ČVUT FS, Ústav mechaniky, 2004. pp. 54-74. ISBN 80-01-02958-1.
  • From CT Images to 3D Muscle Model – Daniel, M., In: Summer Workshop of Applied Mechanics - Book of Abstracts. Praha: ČVUT FS, Ústav mechaniky, 2004. pp. 44-53. ISBN 80-01-02958-1.
  • Mathematical Modelling of Spinal Load – Daniel, M. - Sochor, M., In: Proceedings of Workshop 2004. Praha: České vysoké učení technické v Praze, 2004. pp. 828-829. ISBN 80-01-02945-X.
  • Structure of the Human Intervertebral Disc Maximizes Its Stiffness – Daniel, M. - Mareš, T. - Sochor, M., - Holý, S., In: Experimental Stress Analysis 2004. Plzeň: Škoda Výzkum, 2004. pp. 39-41. ISBN 80-239-2964-X.

2003

  • Příklad použití při výpoctu rozložení kontaktního tlaku u pacientů s aseptickou nekrózou hlavice femuru – Daniel, M. - Krajl-Iglič, V. - Iglič, A., - Sochor, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. pp. 89-96. ISBN 80-01-02739-2.
  • Určení rozložení kontaktního tlaku v kyčelním kloubu při aseptické nekróze hlavice femuru – Daniel, M. - Krajl-Iglič, V. - Iglič, A., - Sochor, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. pp. 81-88. ISBN 80-01-02739-2.
  • Rozložení kontaktního tlaku v kyčelním kloubu v závislosti na pozici středu nekrózy – Daniel, M. - Krajl-Iglič, V. - Iglič, A., - Sochor, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. pp. 67-80. ISBN 80-01-02739-2.
  • Porovnání výpočtu rozložení kontakntího tlaku v kyčelním kloubu pro matematický model pravoúhlé a sférické nekrózy – Daniel, M. - Krajl-Iglič, V. - Iglič, A., - Sochor, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. pp. 57-66. ISBN 80-01-02739-2.
  • Matematický model rozložení kontaktního tlaku pri aseptické nekroze hlavice femuru – Daniel, M. - Krajl-Iglič, V. - Iglič, A., - Sochor, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. pp. 28-56. ISBN 80-01-02739-2.
  • Nový typ optimalizačnej funkcie kontrolujúcej činnosť svalov – Daniel, M. - Sochor, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. pp. 22-27. ISBN 80-01-02739-2.
  • Vztah mezi biomechanickými a klinickými parametry popisujícími stav lidského kyčelního kloubu – Kratochvílová, J. - Sochor, M. - Konvičková, S. - Goldmann, T., - Daniel, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. pp. 192-195. ISBN 80-01-02739-2.
  • Matematické modelování tlaku v lidském kyčelním kloubu – Sýkora, J. - Sochor, M. - Konvičková, S. - Goldmann, T., - Daniel, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. pp. 378-390. ISBN 80-01-02739-2.
  • How to Explain Shape of the Articular Cartilage in the Human Hip – Daniel, M. - Krajl-Iglič, V. - Iglič, A., - Sochor, M., In: APHYS-2003 Book of Abstracts 1st International Meeting on Applied Physics. Badajoz: Formatex, 2003. pp. 429.
  • Mathematical Modelling of Stress in the Hip during Routine Activities – Daniel, M. - Krajl-Iglič, V. - Iglič, A., - Sochor, M., In: APHYS-2003 Book of Abstracts 1st International Meeting on Applied Physics. Badajoz: Formatex, 2003. pp. 430.
  • Detection of Mechanical Signals by Biological Principles – Daniel, M. - Holý, S., - Sochor, M., In: YSESM 2003 - Extended Summaries. Bologna: University of Bologna, 2003. pp. 19-20. ISBN 88-901080-0-2.

2002

  • Contact Stress in the Human Hip - Mathematical Model Compared to Direct Measurement – Daniel, M. - Sochor, M., In: Experimental Stress Analysis. Praha: Asociace strojních inženýrů, 2002. pp. 41-42. ISBN 80-01-02547-0.
  • Computation of the Shear Stress in the Femoral Neck – Mavčič, B. - Bohinc, K. - Daniel, M. - Sevšek, F. - Kralj-Iglič, V., - Iglič, A., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2002. pp. 120-128. ISBN 80-01-02552-7.
  • Mechano-Biosensors Based on Biological Membrane – Daniel, M. - Holý, S., - Sochor, M., In: Summer Workshop of Applied Mechanics. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2002. pp. B1-B3. ISBN 80-01-02552-7.
  • Biosensors in Mechanical Engineering – Daniel, M. - Holý, S., - Sochor, M., In: Abstracts of 19th Danubia-Adria Symposium. ???: Comittee for Mechanics of the Polish Academy of Sciences, 2002. pp. 16-17.
  • Biomechanical Explanation of a Relationship Observed between the Lumbar Spinal Curvature and Resulting Low Back Pain – Daniel, M. - Sochor, M., In: Biomechanics of Man 2002 (BMC 02). Praha: Czech Society of Biomechanics, 2002. pp. 72-73. ISBN 80-86317-23-4.
  • Hypothesis of the Regulation of the Cartilage Activity by Mechanical Loading – Daniel, M. - Sochor, M. - Kralj-Iglič, V., - Iglič, A., In: Biomechanics of Man 2002 (BMC 02). Praha: Czech Society of Biomechanics, 2002. pp. 22-23. ISBN 80-86317-23-4.
  • Gradient of Contact Stress in Normal and Dysplastic Human Hips – Daniel, M. - Sochor, M. - Iglič, A. - Herman, S., - Kralj-Iglič, V., In: Acta of Bioengineering and Biomechanics. Proceedings of the 13th Conference of European Society of Biomechanics. Wroclaw: Oficyna Wydawnicza Politechniki Wroclawskiej, 2002. pp. 280-281. ISBN 83-7085-639-X.
  • Computer Systém for Determination of Contact Hip Stress Based on Mathematical Model – Daniel, M. - Sochor, M. - Iglič, A., - Kralj-Iglič, V., In: Acta of Bioengineering and Biomechanics. Proceedings of the 13th Conference of European Society of Biomechanics. Wroclaw: Oficyna Wydawnicza Politechniki Wroclawskiej, 2002. pp. 296-297. ISBN 83-7085-639-X.
  • Distribution of Contact Hip Joint Stress in Avascular Necrosis of Femoral Head – Dolinar, D. - Herman, S. - Daniel, M. - Pavlovič, V., - Iglič, A., In: Acta of Bioengineering and Biomechanics. Proceedings of the 13th Conference of European Society of Biomechanics. Wroclaw: Oficyna Wydawnicza Politechniki Wroclawskiej, 2002. pp. 302-303. ISBN 83-7085-639-X.

????

  • FINITE ELEMENT ANALYSIS OF THE CONTACT STRESS DISTRIBUTION IN NEW SHAPE OF A HIP CUP – Sýkora, J. - Konvičková, S., - Daniel, M., In: neuvedeno., ????

Patent, užitný a průmyslový vzor

2024

  • Implantát pro kranioplastiku – Daniel, M. - Džugan, J. - Síbr, M., - Havránek, M., Czechia. Utility Model. 2024-04-05.

2023

  • Užitný vzor nové konstrukce náhrady – Daniel, M. - Džugan, J. - Síbr, M., - Havránek, M., Utility Model. 2023-10-18.
  • Náhrada čelistního kloubu – Daniel, M. - Džugan, J. - Síbr, M., - Havránek, M., Utility Model. 2023-11-15.

2019

  • Kloubní hlavice totálních náhrad kyčelního kloubu – Daniel, M., Czechia. Patent CZ 307739. 2019-02-27.

2015

  • Inteligentní implantabilní zdravotnický prostředek – Čejka, Z. - Denk, F., - Daniel, M., Czechia. Utility Model CZ 28203. 2015-05-13.

2013

  • Bioreattore per l'ingegneria tessutale funzionale – Franta, L. - Daniel, M., Italy. Utility Model 276518. 2013-09-27.
  • Bioreaktor dlja funkcional'noji tkanynnoji inženeriji – Franta, L. - Daniel, M., Ukraine. Utility Model 80513. 2013-06-10.
  • Bioreaktor – Franta, L. - Daniel, M., Austria. Utility Model 13284. 2013-07-15.

2012

  • Biorreactor para la formación de repuestos de tejidos – Franta, L. - Daniel, M., Spain. Utility Model 1077105. 2012-08-28.
  • Bioreaktor pre funkčné tkanivové inžinierstvo – Franta, L. - Daniel, M., Slovakia. Utility Model 3661. 2012-10-19.
  • Bioreaktor dlja funkcional'noj tkanevoj inženerii – Franta, L. - Daniel, M., Russian Federation. Utility Model 117920. 2012-07-10.

2011

  • Der Bioreaktor für funktionelles Gewebe Engineering – Franta, L. - Daniel, M., Germany. Utility Model 20 2011 106 876. 2011-11-14.

2010

  • Bioreaktor pro funkční tkáňové inženýrstv – Franta, L. - Daniel, M., Czechia. Utility Model CZ 21539. 2010-11-08.
  • Bioreaktor s rotačním indentorem pro funkční tkáňové inženýrství náhrad chrupavky – Franta, L. - Daniel, M., Czechia. Utility Model Application., 2010

2007

  • Hlavice totální náhrady kyčelního kloubu optimalizující rozložení kontaktního tlaku – Konvičková, S. - Sýkora, J., - Daniel, M., Czechia. Utility Model CZ 17312., 2007

2006

  • Hlavice totální náhrady kyčelního kloubu optimalizující rozložení kontaktního tlaku – Sýkora, J. - Konvičková, S., - Daniel, M., Czechia. Utility Model Application., 2006

Prototyp, funkční vzorek

2024

  • Funkční vzorek multimateriálové ortézy – Zoufalý, O. - Mendová, K. - Daniel, M. - Džugan, J. - Síbr, M., - Sýkora, T., [Functional Sample] 2024.

2023

  • Funkční vzorek náhrady kosti – Daniel, M. - Džugan, J. - Síbr, M., - Havránek, M., [Functional Sample] 2023.
  • Funkční vzorek nové konstrukce temporomandibulárního kloubu – Daniel, M. - Džugan, J. - Síbr, M., - Havránek, M., [Functional Sample] 2023.
  • Funkční vzorek nové konstrukce náhrady zápěstí – Daniel, M. - Džugan, J. - Síbr, M., - Havránek, M., [Functional Sample] 2023.
  • 'Funkční vzorek nové konstrukce náhrady kloubu haluxu – Daniel, M. - Čejka, Z. - Síbr, M., - Džugan, J., [Functional Sample] 2023.

2017

  • Funkční vzorek optimalizované inteligentní endoprotézy – Čejka, Z. - Daniel, M., [Functional Sample] 2017.

2016

  • Funkční vzorek inteligentní endoprotézy – Čejka, Z. - Daniel, M., [Functional Sample] 2016.

2015

  • Implantabilní pouzdro pro uložení detektoru – Čejka, Z. - Daniel, M., [Functional Sample] 2015.

2011

  • Mechanismus přenosu kroutícího momentů na testované vzorky a převádějící kyvný pohyb motoru na rotační v uložení ložisek hřídele. – Franta, L. - Bouda, T., - Daniel, M., [Functional Sample] 2011.
  • Mechanismus přenosu zatížení z akčního šlenu na simulátoru KKK ELO R2011 na zkušební vzorky – Franta, L. - Bouda, T., - Daniel, M., [Functional Sample] 2011.
  • Rám prototypu simulátoru KKK ELO R2011 – Franta, L. - Bouda, T. - Růžička, P., - Daniel, M., [Functional Sample] 2011.

2010

  • Zatěžovací mechanismus bioreaktoru kloubních chrupavek – Franta, L. - Daniel, M., [Functional Sample] 2010.
  • Klimatická komora pro bioreaktor s řízenou atmosférou – Franta, L. - Daniel, M., [Functional Sample] 2010.

2009

  • Femoral head of total hip replacement with AP asymmetry – Daniel, M., [Functional Sample] 2009.
  • Total hip replacement with anteroposterior assymetry of the acetabular cup – Daniel, M., [Functional Sample] 2009.
  • Mechanismus pro testování biotribologických vlastností kolenní náhrady závěsného typu – Franta, L. - Daniel, M., [Functional Sample] 2009.
  • Upínací přípravky pro testování opotřebení kolenní náhrady závěsného typu – Franta, L. - Daniel, M., [Functional Sample] 2009.

2006

  • Acetabulární komponenta totální kyčelní náhrady s mediálně asymetrickou kloubní plochou – Sýkora, J. - Konvičková, S., - Daniel, M., [Prototype] 2006.
  • Acetabulární komponenta totální kyčelní náhrady s otvorem – Sýkora, J. - Konvičková, S., - Daniel, M., [Prototype] 2006.
  • Skosená acetabulární komponenta totální kyčelní náhrady – Sýkora, J. - Konvičková, S., - Daniel, M., [Prototype] 2006.

Software

2010

  • DNA membrane encapsulation – Daniel, M., [Software] 2010.

2009

  • JHipstress – Daniel, M., [Software] 2009.

2006

  • Computer System for Determination Quantitative Geometry of Musculoskeletal System – Daniel, M., [Other Software (not meeting RIV conditions)] 2006.

2005

  • HIPSTRESS – Daniel, M., [Software] 2005.

Zpráva

2023

  • Mechanobiologický model hojení zlomeniny kosti – Sedláček, R. - Daniel, M. - Kratochvíl, A. - Zach, L., - Padovec, Z., [Research Report] Praha: CTU FME. Department of Mechanics, Biomechanics and Mechatronics, 2023. Report no. 12105/23/08.

2019

  • Numerická a experimentální analýza C/PPS T-profilů s použitím vrstvených prvků – Padovec, Z. - Sedláček, R. - Zámečníková, T., - Daniel, M., [Research Report] Praha: ČVUT v Praze, Fakulta strojní, Ústav mechaniky, biomechaniky a mechatroniky, 2019. Report no. 12105/19/11.
  • FE analýza vybraných variant C/PPS Omega profilu – Padovec, Z. - Zámečníková, T. - Sedláček, R., - Daniel, M., [Research Report] Praha: ČVUT v Praze, Fakulta strojní, Ústav mechaniky, biomechaniky a mechatroniky, 2019. Report no. 12105/19/10.

2016

  • Task B report - trabecular mesh development – Daniel, M. - Pehlivan, E., [Research Report] 2016.

2015

  • Vývoj inteligentních endoprotéz se včasnou automatickou detekcí možného selhání - Etapa II - souhrnná zpráva – Čejka, Z. - Růžička, P. - Daniel, M. - Jahoda, D. - Judl, T. - Syrovátka, H. - Přidal, J. - Přidal, J., - Síbr, M., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. Report no. 12105/15/58.

2014

  • Nové materiály a povrchové vrstvy pro bionický návrh kloubních náhrad - závěrečná zpráva – Daniel, M., [Annual Report] 2014. Report no. TA01010185-Z.
  • Vývoj inteligentních endoprotéz se včasnou automatickou detekcí možného selhání - Etapa I - souhrnná zpráva – Čejka, Z. - Růžička, P. - Daniel, M. - Jahoda, D. - Judl, T. - Syrovátka, H. - Přidal, J. - Přidal, J., - Síbr, M., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2014. Report no. 12105/14/54.
  • Únavové zkoušky finálních Beta-titanových slitin Ti-36Nb-6Ta – Sedláček, R. - Daniel, M., [Research Report] Praha: ČVUT v Praze, Fakulta strojní, Ústav mechaniky, biomechaniky a mechatroniky, 2014.

2013

  • Souhrná zpráva k projektu TAČR TA01010185 – Daniel, M., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2013. Report no. 12105/13/68.

2011

  • Profilometrie kolení kloubní náhrady – Chlup, H. - Horný, L. - Růžička, P. - Franta, L., - Daniel, M., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2011. Report no. 12105/11/35.
  • Návrh a výroba přípravků pro upevnění testovacích vzorků (slitina Ti s vrstvou DLC proti PEEK) – Franta, L. - Daniel, M. - Dolejší, Jan, - Čejka, Zdeněk, [Research Report] Prague: Czech Technical University - Fac. of Mechanical Engineering, 2011. Report no. 12105/11/26.
  • Metodika vyhodnocení otěru – Franta, L. - Daniel, M., [Research Report] Prague: Czech Technical University - Fac. of Mechanical Engineering, 2011. Report no. 12105/11/25.
  • Vyhodnocení otěrových experimentů alfa-slitiny Ti s povlakem DLC na "malých vzorcích" – Franta, L. - Daniel, M., - Cvrček, L., [Research Report] Prague: Czech Technical University - Fac. of Mechanical Engineering, 2011. Report no. 12105/11/24.

2010

  • Tumorové a Rostoucí náhrady kolenního a kyčelního kloubu - biomechanická anal‎‎ýza – Daniel, M. - Zach, L., - Franta, L., [Research Report] Praha: ČVUT v Praze, FS, 2010. Report no. 12105/10/09.

2009

  • Tumorové a rostoucí náhrady kolenního a kyčelního kloubu - biomechanická analýza – Daniel, M. - Zach, L., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2009. Report no. 12105/09/09.
  • Tumorové náhrady kolenního a kyčelního kloubu - etapa III - průbežná zpráva – Daniel, M. - Zach, L., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2009. Report no. 12105/09.
  • Tumorové náhrady kolenního a kyčelního kloubu - výpočty MKP nového typu náhrady – Zach, L. - Daniel, M., - Konvičková, S., [Research Report] Praha: Czech Technical University in Prague, 2009. Report no. 12105/09/09.

2008

  • Tumorové náhrady kolenního a kyčelního kloubu - etapa II - průbežná zpráva – Daniel, M. - Franta, L., - Zach, L., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2008. Report no. 12105/08.
  • Tumorové náhrady kolenního a kyčelního kloubu - etapa II – Daniel, M. - Zach, L., - Franta, L., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2008. Report no. 12105/08/09.

2007

  • Tumorové náhrady kolenního a kyčelního kloubu - průběžná zpráva – Daniel, M. - Zach, L., - Franta, L., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2007. Report no. 12105/07.
  • Tumorové náhrady kolenního a kyčelního kloubu – Daniel, M. - Franta, L., - Zach, L., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2007. Report no. 12105/07/17.

2004

  • Determination of the Hip Joint Force Resultant using Inverse Dynamical Modelling – Daniel, M., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2004. Report no. 2051/04/39.
  • Optimisation of the Muscle Activity – Daniel, M. - Sochor, M., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2004. Report no. 2051/04/03.
  • Matematické modelování zatížení lumbální páteře - fáze III – Daniel, M., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2004. Report no. 2051/04/25.

2003

  • Biomechanická analýza aseptické nekrózy hlavice femuru – Daniel, M. - Sochor, M., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2003. Report no. 2051/03/11.
  • Matematické modelování bederní páteře – Daniel, M. - Sochor, M., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2003. Report no. 2051/03/15.
  • Experimnetálne metódy biomechaniky – Daniel, M. - Sochor, M., - Holý, S., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2003. Report no. 2051/03/14.

2002

  • Matematické modelování zatížení bederní páteře – Daniel, M. - Sochor, M., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2002. Report no. 2051/02/18.

Kvalifikační zpráva

2018

  • Experimentální analýza mechanických vlastností buněčné membrány – Hornát, B. - Otáhal, M., - Daniel, M. opon., Defense date 2018-06-19. Master Thesis. CTU FBME. Department of Natural Sciences.

2017

  • Characterization of size of polydispers nanoparticles of various shape: Comparative study of AFM and DLS methods – Mineva, A. - Petráková, V., - Daniel, M. opon., Kladno: Defense date 2017-06-27. Master Thesis. FBMI ČVUT.

2015

  • Experimentální analýza kinematiky meziobratlového skloubení lumbální páteře – Tomšovský, L. - Otáhal, M., - Daniel, M. opon., Kladno: 2015. Master Thesis. České vysoké učení technické v Praze, Fakulta biomedicínského inženýrství.

2009

  • Mechanobiology in diagnosis, therapy and rehabilitation – Daniel, M., Praha: Defense date 2009-05-21. Associate Professor Lecture. České vysoké učení technické v Praze, Fakulta strojní.
  • Mechanobiology of articular cartilage – Daniel, M., Praha: 2009. Associate Professor Thesis. České vysoké učení technické v Praze, Fakulta strojní.

Monografie, skripta, učebnice, encyklopedie

2011

  • Human hip joint loading - mathematical modeling – Daniel, M. - Iglic, A., - Kralj-Iglic, V., Saarbrücken: VDM Verlag Dr. Müller Aktiengesellschaft & Co. KG, 2011. ISBN 3639261208.

2007

  • Biomechanics of Biomembranes – Daniel, M. - Mareš, T., Praha: Nakladatelství ČVUT, 2007. ISBN 978-80-01-03915-1.

????

  • Human hip joint loading - mathematical modeling – Daniel, M. - Iglic, A., - Kralj-Iglic, V., Saarbrücken: VDM Verlag Dr. Müller Aktiengesellschaft & Co. KG, ISBN 3639261208., ????

Kapitola v knize

2021

  • Interactions between biomembrane embedded nanoparticles mediated by lipid bilayer – Daniel, M. - Řezníčková, J., - Mendová, K., In: Advances in Biomembranes and Lipid Self-Assembly. Elsevier Inc, 2021. p. 17-36. ISSN 2451-9634.

2012

  • Role of Biomechanical Parameters in Hip Osteoarthritis and Avascular Necrosis of Femoral Head – Kralj-Iglic, V. - Dolinar, Drago - Ivanovski, Matic - List, Ivo, - Daniel, M., In: Applied Biological Engineering - Principles and Practice. Vienna: InTech - Open Access Publisher, 2012. ISBN 978-953-51-0412-4.
  • Role of Surface-Active Lipids in Cartilage Lubrication – Daniel, M., In: Advances in Planar Lipid Bilayers and Liposomes. Amsterdam: Elsevier, 2012. p. 225-243. Advances in Planar Lipid Bilayers and Liposomes. vol. 15. ISBN 978-0-12-396533-2.
  • Otěr artikulačních komponent a jeho vliv na aseptické uvolnění aloplastiky – Pokorný, D. - Šlouf, Miroslav - Fulín, P. - Daniel, M., - Sosna, A., In: Revizní operace totálních náhrad kyčelního kloubu. Praha: MAXDORF, 2012. p. 65-105. ISBN 978-80-7345-254-4.

2010

  • Acetabular loading in rehabilitation – Debevec, H. - Iglic, A. - Kralj-Iglič, V., - Daniel, M., In: Rehabilitation Engineering. Vukovar: Intech, 2010. p. 139-156. ISBN 978-953-307-023-0.

2009

  • Stability of the inverted hexagonal phase – Perutkova, S. - Daniel, M. - Dolinar, G. - Rappolt, M. - Kralj-Iglic, V., - Iglic, A., In: Advances in Planar Lipid Bilayers and Liposomes, Vol 9. 9 ed. New York: Elsevier Science, 2009. p. 238-278. Advances in Planar Lipid Bilayers and Liposomes. ISSN 1554-4516. ISBN 978-0-12-374822-5.

2007

  • Hip stress distribution may be a risk factor for avascular necrosis of femoral head – Kralj-Iglic, V. - Dolinar, D. - Ivanovski, M. - List, I. - Daniel, M. - Tomsic, M., - Iglic, A., In: 11th Mediterranean Conference on Medical and Biomedical Engineering and Computing 2007. Berlin: Springer, 2007. p. 282-285. ISBN 978-3-540-73043-9.
  • Coalescence of phospholipid vesicles mediated by beta2GPI - experiment and modelling – Urbanija, J. - Rozman, B. - Iglic, A. - Mareš, T. - Daniel, M., - Kralj-Iglic, V., In: 11th Mediterranean Conference on Medical and Biomedical Engineering and Computing 2007. Berlin: Springer, 2007. p. 246-248. ISBN 978-3-540-73043-9.
  • Acetabular Forces and Contact Stresses in Active Abduction Rehabilitation – Daniel, M. - Debevec, H. - Kristan, A. - Mavcic, B. - Cimerman, M., - Tonin, M., In: 11th Mediterranean Conference on Medical and Biomedical Engineering and Computing 2007. Berlin: Springer, 2007. p. 915-918. ISBN 978-3-540-73043-9.

2006

  • Application of Composite Lamination Theory to the Complex Model of the Intervertebral Disc – Mareš, T. - Daniel, M., In: Advanced Technologies, Research-Development-Applications. Mammendorf: Pro Literatur Verlag, 2006. p. 641-660. ISBN 3-86611-197-5.

Sborník

2022

  • Vývoj 3D tlačných AFO ortéz – Mendová, K. ed. - Zoufalý, O. ed. - Daniel, M. ed., - Růžička, P. ed., Herbertov, Horní Mlýn, 2022-09-13/2022-09-16. Praha: Czech Technical University in Prague, 2022. ISBN 978-80-01-07023-9.

2015

  • ESB 2015 – Book of Extended Abstracts – Horák, Z. ed. - Daniel, M. ed., - Jezek, K. ed., Praha, 2015-08-05/2015-08-08. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. ISBN 978-80-01-05777-3.
  • Book of Extended Abstracts ESB 2015 – Horák, Z. ed. - Daniel, M. ed., - Ježek, K. ed., Praha, 2015-08-05/2015-08-08. 2015. ISBN 978-80-01-05777-3.

2010

  • STRETECH – Vítek, K. ed. - Šulc, R. ed. - Kudláček, J. ed. - Novotný, C. ed. - Tatíček, F. ed. - Doubrava, K. ed. - Španiel, M. ed. - Mareš, T. ed. - Daniel, M. ed., - Fürbacher, M. ed., Praha, 2010-06-16. Prague: Czech Technical University, 2010. ISBN 978-80-01-04578-7.

2009

  • Středoškolská technika 2009 – Daniel, M. ed. - Fürbacher, M. ed. - Mareš, T. ed. - Novotný, C. ed. - Španiel, M. ed. - Šulc, R. ed. - Tatíček, F. ed., - Vítek, K. ed., Praha, 2009-06-17. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2009. 1. ISBN 978-80-01-04367-7.
  • 10th Workshop on Applied Mechanics Proceeding – Konvičková, S. ed. - Růžička, M. ed. - Daniel, M. ed. - Horák, Z. ed., - Mareš, T. ed., Praha, 2009-02-11. Praha: Department of Mechanics, Biomechanics and Mechatronics; FME; CTU in Prague, 2009. ISBN 978-80-01-04332-5.
  • 10th Workshop on Applied Mechanics Proceeding – Konvičková, S. ed. - Růžička, M. ed. - Daniel, M. ed. - Horák, Z. ed., - Mareš, T. ed., Praha, 2009-02-11. Praha: Department of Mechanics, Biomechanics and Mechatronics; FME; CTU in Prague, 2009. ISBN 978-80-01-04332-5.

2008

  • Středoškolská technika 2008 – Mareš, T. ed. - Daniel, M. ed. - Fürbacher, M. ed. - Kreibich, V. ed. - Šulc, R. ed. - Tatíček, F. ed., - Vítek, K. ed., Praha, 2008-05-27. Praha: Czech Technical University in Prague, 2008. ISBN 978-80-01-04103-1.
  • Human Biomechanics 2008 International Conference, Extended Abstracts – Vilímek, M. ed. - Daniel, M. ed., Praha, 2008-09-29/2008-10-01. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2008. ISBN 978-80-01-04163-5.
  • 9th Workshop on Applied Mechanics – Konvičková, S. ed. - Růžička, M. ed. - Daniel, M. ed., - Mareš, T. ed., Prague, 2008-02-22. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2008. ISBN 978-80-01-04161-1.
  • 25th Symposium on Advances in Experimental Mechanics – Daniel, M. ed. - Holý, S. ed., - Růžička, M. ed., České Budějovice, Český Krumlov, 2008-09-24/2008-09-27. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2008. ISBN 978-80-01-04162-8.

2007

  • 8th Workshop of Applied Mechanics – Daniel, M. ed. - Mareš, T. ed. - Konvičková, S. ed., - Růžička, M. ed., Praha, 2007-10-19. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2007. ISBN 978-80-01-03895-6.
  • Winter Workshop of Applied Mechanics – Konvičková, S. ed. - Růžička, M. ed. - Daniel, M. ed., - Mareš, T. ed., Praha, 2007-02-16. Praha: Nakladatelství ČVUT, 2007. ISBN 978-80-01-03710-2.
  • Středoškolská technika 2007 – Mareš, T. ed. - Daniel, M. ed. - Fürbacher, M. ed. - Kreibich, V. ed. - Šulc, R. ed. - Tatíček, F. ed., - Vítek, K. ed., Praha, 2007-06-18. Praha: Nakladatelství ČVUT, 2007. ISBN 978-80-01-03751-5.

2006

  • Summer Workshop of Applied Mechanics 2006 – Daniel, M. ed. - Konvičková, S. ed. - Mareš, T. ed., - Růžička, M. ed., FME CTU in Prague, 2006-10-06. Praha: Fakulta strojní ČVUT, 2006. ISBN 80-01-03453-4.
  • Winter Workshop of Applied Mechanics Proceeding – Konvičková, S. ed. - Daniel, M. ed. - Mareš, T. ed., - Růžička, M. ed., Prague, 2006-02-22. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2006. ISBN 80-01-03455-0.

2005

  • Summer Workshop of Applied Mechanics – Konvičková, S. ed. - Daniel, M. ed. - Zavřel, J. ed., - Mareš, T. ed., Praha, 2005-06-15. Prague: Czech Technical University, 2005. ISBN 80-01-03200-0.

2004

  • Summer Workshop of Applied Mechanics - Book of Abstracts – Konvičková, S. ed. - Zavřel, J. ed. - Mareš, T. ed., - Daniel, M. ed., Praha, 2004-06-10. Praha: ČVUT FS, Ústav mechaniky, 2004. ISBN 80-01-02958-1.

2003

  • Summer Workshop of Applied Mechanics – Konvičková, S. ed. - Daniel, M. ed., - Zavřel, J. ed., Praha, 2003-06-20. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2003. ISBN 80-01-02739-2.

2002

  • Summer Workshop of Applied Mechanics – Konvičková, S. ed. - Leitermann, D. ed., - Daniel, M. ed., Praha, 2002-06-26. Praha: ČVUT FS, Ústav mechaniky, Odbor pružnosti a pevnosti, 2002. ISBN 80-01-02552-7.

Pořádání konference, workshopu, výstavy

2010

  • STRETECH – Vítek, K. org. - Šulc, R. org. - Kudláček, J. org. - Novotný, C. org. - Tatíček, F. org. - Doubrava, K. org. - Španiel, M. org. - Mareš, T. org. - Daniel, M. org., - Fürbacher, M. org., [Conference Hosting] 2010.

2009

  • 10th Workshop on Applied Mechanics – Konvičková, S. org. - Růžička, M. org. - Mareš, T. org. - Horák, Z. org., - Daniel, M. org., [Conference Hosting] 2009.
  • Středoškolská technika 2009 – Daniel, M. org. - Fürbacher, M. org. - Mareš, T. org. - Novotný, C. org. - Španiel, M. org. - Šulc, R. org. - Tatíček, F. org., - Vítek, K. org., [Conference Hosting] 2009.

2008

  • Danubia-Adria Symposium on Advances in Experimental Mechanics – Růžička, M. org. - Holý, S. org. - Daniel, M. org., - Krejča, M. org., [Conference Hosting] 2008.
  • Středoškolská technika 2008 – Mareš, T. org. - Vítek, K. org. - Doubrava, K. org. - Daniel, M. org. - Fürbacher, M. org. - Šulc, R. org. - Kreibich, V. org. - Tatíček, F. org., - Novotný, C. org., [Conference Hosting] 2008.

2007

  • 8th Workshop of Applied Mechanics – Daniel, M. org. - Mareš, T. org. - Konvičková, S. org., - Růžička, M. org., [Conference Hosting] 2007.
  • Winter Workshop of Applied Mechanics – Konvičková, S. org. - Růžička, M. org. - Daniel, M. org., - Mareš, T. org., [Workshop Hosting] 2007.
  • Středoškolská technika 2007 – Mareš, T. org. - Daniel, M. org. - Fürbacher, M. org. - Kreibich, V. org. - Šulc, R. org. - Tatíček, F. org., - Vítek, K. org., [Conference Hosting] 2007.

2006

  • 5th Workshop of Applied Mechanics – Daniel, M. org. - Konvičková, S. org. - Mareš, T. org., - Růžička, M. org., [Workshop Hosting] 2006.
  • Summer Workshop of Applied Mechanics – Daniel, M. org. - Konvičková, S. org. - Mareš, T. org., - Růžička, M. org., [Workshop Hosting] 2006.

2005

  • Summer Workshop of Applied Mechanics – Konvičková, S. org. - Daniel, M. org. - Zavřel, J. org., - Mareš, T. org., [Workshop Hosting] 2005.

Vyzvaná nepublikovaná přednáška

2022

  • Fitting postoperative 2D X-ray to preoperative 3D CT scan in patients with total shoulder arthroplasty – Kratochvíl, A. - Daniel, M., [Invited unpublished scientific lecture] 2022-11-11.

2019

  • Biomechanika horní končetiny - co bylo dřív používání nástrojů nebo vzpřímená chůze? – Daniel, M., [Invited unpublished scientific lecture] Ústí nad Labem: XV. KONGRES ČESKÉ SPOLEČNOSTI CHIRURGIE RUKY, Česká společnost chirurgie ruky ČLS JEP. 2019-11-01.

2013

  • Klinická biomechanika + určování sil působících ve svalově-kosterním systému – Daniel, M., [Invited unpublished scientific lecture] Bratislava: Slovenská lekárska spoločnosť. 2013-09-11.
  • ESB 2013 Precourse - Biomechanics of biomembrane as self-assembling nanostructure – Daniel, M., [Invited unpublished scientific lecture] Patras: University of Patras. 2013-08-25.
  • Perspectives in hip joint replacement design - bionic design – Daniel, M., [Invited unpublished scientific lecture] Ljubljana: University of Ljubljana, Faculty of Health Sciences. 2013-11-20.

2003

  • Experimentálne metódy biomechaniky – Daniel, M. - Sochor, M., [Invited unpublished scientific lecture] Bratislava: SAV Medzinárodné laserové centrum. 2003-04-29.
  • Optimalization Function in the Inverse Dynamics – Daniel, M. - Sochor, M., [Invited unpublished scientific lecture] Ljubljana: University of Ljubljana Group of Applied Physics. 2003-07-18.

2002

  • Gradient of Contact Stress in Normal and Dysplastic Human Hips – Daniel, M. - Sochor, M. - Iglič, A., - Kralj-Iglič, V., [Invited unpublished scientific lecture] Ljubljana: University of Ljubljana Faculty of Medicine. 2002-07-29.

Ostatní nezařazené

2021

  • Total hip arthroplasty with ultra-short uncemented stem in patients with osteonecrosis of the femoral head: mid-term results – Necas, L. - Hrubina, M. - Melisik, M. - Cabala, J. - Cibula, Z., - Daniel, M., Hip International. 2021, 1-8. ISSN 1120-7000.

2012

  • A comparative study of muscle force estimates using Huxley's and Hill's muscle model – Čadová, M. - Vilímek, M., - Daniel, M., Computer Methods in Biomechanics and Biomedical Engineering. 2012, ISSN 1025-5842.

2010

  • Elastic deformations in hexagonal phases studied by small-angle X-ray diffraction and simulations. – Perutkova, S. - Daniel, M. - Rappolt, M. - Pabst, G. - Dolinar, G. - Kralj-Iglic, V., - Iglic, Ales, Physical Chemistry Chemical Physics. 2010, ISSN 1463-9076.