[design/2014/cvut-logo-blue.png]
CZ / EN

Ústav mechaniky, biomechaniky a mechatroniky

CZ   / EN  

Lidé

Jaroslav Lukeš

Ing. Jaroslav Lukeš, Ph.D.

jaroslav.lukes (zavináč) fs.cvut.cz

(22 435) 2649
420602261493

místnost: A1-s113, Dejvice

Navigace

Další informace můžete nalézt v centrální databázi. V3S.

Granty

  • CTU0821112  
    Konference ICBME 2008: Vyšetřování mikroreologických vlastností meziobratlové plotýnky pomocí nanoindentace – Lukeš, J. (2008)

Článek v periodiku

2024

  • Thermoplastic Starch with Maltodextrin: Preparation, Morphology, Rheology, and Mechanical Properties – Rana, L.; Kouka, S.; Gajdosova, V.; Strachota, B.; Lukeš, J. et al., Materials. 2024, 17(22), 1-18. ISSN 1996-1944.

2022

  • Pulsed Plasma Surfacing of Titanium Matrix Cermet Based on B4C – Rohan, P.; Lukáč, F.; Horník, J.; Krum, S.; Kolaříková, M.; Šepitka, J.; Lukeš, J.; Kuchař, J., Journal of Thermal Spray Technology. 2022, 2022(31), 1975-1984. ISSN 1544-1016.

2020

  • High-speed mechanical mapping of blended cement pastes and its comparison with standard modes of nanoindentation – Němeček, J.; Lukeš, J.; Němeček, J., Materials Today Communications. 2020, 23 ISSN 2352-4928.

2019

  • Surface modification of glass fibers by oxidized plasma coatings to improve interfacial shear strength in GF/polyester composites – Cech, V.; Knob, A.; Lasota, T.; Lukeš, J.; Drzal, L.T., Polymer Composites. 2019, 40 E186-E193. ISSN 0272-8397.

2018

  • Further Progress in Functional Interlayers with Controlled Mechanical Properties Designed for Glass Fiber/Polyester Composites – Knob, A.; Lukeš, J.; Drzal, L.; Cech, V., Fibres. 2018, 6(3), ISSN 2079-6439.

2017

  • The effect of polymeric membrane surface on HaCaT cell properties – Kobiela, T.; Milner-Krawczyk, M.; Lukowska, E.; Dobrzynski, P.; Pastusiak, M.; Smola-Dmochowska, A.; Lukeš, J.; Bobecka-Wesolowska, K. et al., Micron. 2017, 101 162-169. ISSN 0968-4328.
  • Antibacterial, mechanical and surface properties of Ag-DLC fi lms prepared by dual PLD for medical applications – Písařík, P.; Jelínek, M.; Remsa, J.; Mikšovský, J.; Zemek, J.; Jurek, K.; Kubinová, Š.; Lukeš, J. et al., Materials Science and Engineering C, Biomimetic and Supramolecular Systems. 2017, 77 955-962. ISSN 0928-4931.

2016

  • Physico-chemical properties of PDMS surfaces suitable as substratesfor cell cultures – Raczkowska, J.R.; Prauzner-Bechcicki, S.P.-B.; Lukeš, J.; Šepitka, J.; Bernasik, A.B.; Awsiuk, K.A.; Paluszkiewicz, C.P.; Pabijan, J.P. et al., Applied Surface Science. 2016, 389 247-254. ISSN 0169-4332.

2015

  • The critical influence of surface topography on nanoindentation measurements of a-SiC: H films – Čech, V.; Lasota, T.; Palesch, E.; Lukeš, J., Surface & Coatings Technology. 2015, 261 114-121. ISSN 0257-8972.
  • Elastic Modulus and Hardness of Plasma-Polymerized Organosilicones Evaluated by Nanoindentation Techniques – Čech, V.; Lukeš, J.; Palesch, E.; Lasota, T., Plasma Processes and Polymers. 2015, 12(9), 864-881. ISSN 1612-8850.
  • Nanoindentation studies and modeling of surface layers on austenitic stainless steels by extreme electrochemical treatments – Rokosz, K.; Hryniewicz, T.; Lukeš, J.; Šepitka, J., SURFACE AND INTERFACE ANALYSIS. 2015, 47(6), 643-647. ISSN 0142-2421.
  • Elastic Properties of Human Osteon and Osteonal Lamella Computed by a Bidirectional Micromechanical Model and Validated by Nanoindentation – Korsa, R.; Lukeš, J.; Šepitka, J.; Mareš, T., Journal of Biomechanical Engineering. 2015, 137(8), ISSN 0148-0731.
  • PDMS substrate stiffness affects the morphology and growth profiles of cancerous prostate and melanoma cells – Prauzner-Bechcicki, S.; Raczkowska, J.; Madej, E.; Pabijan, J.; Lukeš, J.; Šepitka, J.; Rysz, J.; Awsiuk, K. et al., Journal of the Mechanical Behavior of Biomedical Materials. 2015, 41 13-22. ISSN 1751-6161.

2014

  • Inspection of post impact fatigue damage in carbon fibre composite using modulus mapping technique – Koudelka, P.; Fila, T.; Doktor, T.; Kytyr, D.; Valach, J.; Šepitka, J.; Lukeš, J., Key Engineering Materials. 2014, 606 245-248. ISSN 1013-9826.
  • Local Viscoelastic Properties of a Thermoplastic/Carbon Laminate as an Indicator of Fatigue Damage – Minster, J.; Sperl, M.; Lukeš, J., Key Engineering Materials. 2014, 606 237-240. ISSN 1013-9826.
  • Constant Load Testing of Materials using Nanoindentation Technique – Kral, P.; Dvorak, J.; Kvapilova, M.; Lukeš, J.; Sklenicka, V., Key Engineering Materials. 2014, 606 69-72. ISSN 1013-9826.
  • Verification of the Trend of MPL Variation in Fatigue by Modern Methods – Gajdos, L.; Sperl, M.; Frankl, J.; Kaiser, J.; Mentl, V.; Kyncl, J.; Lukeš, J.; Kuzel, R., Key Engineering Materials. 2014, 606 99-102. ISSN 1013-9826.

2013

  • The glass fiber-polymer matrix interface/interphase characterized by nanoscale imaging techniques – Čech, V.; Palesch, E.; Lukeš, J., Composites Science and Technology. 2013, 83 22-26. ISSN 0266-3538.
  • Influence of ion bombardment on growth and properties of PLD created DLC films – Jelínek, M.; Písařík, P.; Kocourek, T.; Zemek, J.; Lukeš, J., Applied Physics A: Materials Science & Processing. 2013, 110(4), 943-947. ISSN 0947-8396.

2012

  • Nanoindentation Testing of Composite Based on Collagen and Poly(DL-Lactide) Nanofibers – Suchý, T.; Sucharda, Z.; Šupová, M.; Balík, K.; Šepitka, J.; Lukeš, J., Chemicke Listy. 2012, 106(s3), s545-s546. ISSN 0009-2770.
  • Nanoindentation characterisation of poly(DL-lactide)/collagen nanocomposites – Suchý, T.; Rýglová, Š.; Sucharda, Z.; Balík, K.; Šepitka, J.; Lukeš, J., Computer Methods in Biomechanics and Biomedical Engineering. 2012, 15(S1), 89-90. ISSN 1025-5842.
  • Use of modulus mapping technique to investigate cross-sectional material properties of extracted single human trabeculae – Jiroušek, O.; Kytýř, D.; Zlámal, P.; Doktor, T.; Šepitka, J.; Lukeš, J., Chemické listy. 2012, 106(s3), 442-445. ISSN 0009-2770.
  • Composition, Structural and Material Properties of Leech Teeth - Example of Bioinspiration in Materials Research – Šepitka, J.; Lukeš, J.; Jiroušek, O.; Kytýř, D.; Valach, J., Chemické listy. 2012, 106(S3), 523-524. ISSN 0009-2770.
  • The Influence of Sterilization Processes on the Micromechanical Properties of Polyamide Fiber-Reinforced PDMS Composites for Orthopaedic Applications – Sedláček, R.; Suchý, T.; Sucharda, Z.; Balík, K.; Sochor, M.; Šepitka, J.; Lukeš, J., Computer Methods in Biomechanics and Biomedical Engineering. 2012, 15(S1), 91-92. ISSN 1025-5842.
  • Nanoindentation of Intervertebral Disc Tissues Localized by SHG Imaging – Šepitka, J.; Lukeš, J.; Staněk, L.; Filová, E.; Burdíková, Z.; Řezníček, J., Computer Methods in Biomechanics and Biomedical Engineering. 2012, 15(S), 335-336. ISSN 1025-5842.
  • Reduced Young modulus and hardness of electron irradiated binary potassium-silicate glass – Gedeon, O.; Lukeš, J.; Jurek, K., Nuclear Instruments and Methods in Physics Research, Section B, Beam Interactions with Materials and Atoms. 2012, 2012(275), 7-10. ISSN 0168-583X.
  • LOCAL MICROMECHANICAL PROPERTIES OF DENTAL COMPOSITES – Prejzek, O.; Šepitka, J.; Španiel, M.; Lukeš, J., Chemicke Listy. 2012, 106(S3), 513-514. ISSN 0009-2770.
  • Nanoscratch and Nanowear of Dental Filling Composites – Lukeš, J.; Šepitka, J.; Kolaříková, M.; Eichlerová, R., Chemické listy. 2012, 106(S3), 468-469. ISSN 0009-2770.
  • Nanowear Testing of Composite Materials – Sedláček, R.; Suchý, T.; Šepitka, J.; Lukeš, J.; Sochor, M.; Balík, K.; Sucharda, Z.; Beneš, J., Chemické listy. 2012, 106(s3), s519-s520. ISSN 0009-2770.
  • NANOINDENTATION OF GELATINE/HAP NANOCOMPOSITE – Marx, D.; Šepitka, J.; Lukeš, J.; Balík, K., Chemické listy. 2012, 106(S3), 478-480. ISSN 0009-2770.
  • VISCOELASTIC PROPERTIES OF PORCINE APOPHYSEAL JOINT – Otáhal, M.; Šepitka, J.; Lukeš, J.; Sochor, M.; Otáhal, M., Chemicke Listy. 2012, 106(S3), 505-506. ISSN 0009-2770.
  • DYNAMIC MECHANICAL PROPERTIES OF SOFT TISSUES LOCALIZED BY FLUORESCENCE MICROSCOPE OBTAINED USING NANOINDENTATION – Šepitka, J.; Lukeš, J.; Staněk, L.; Řezníček, J., Chemicke Listy. 2012, 106(S3), 521-522. ISSN 0009-2770.

2011

  • EFFECT OF LIGHT ABSORPTION ON INDENTATION MODULUS OF DENTAL FILLING COMPOSITES – Eichlerová, R.; Lukeš, J.; Šepitka, J.; Konvičková, S., Chemicke Listy. 2011, 2011(105), 794-795. ISSN 0009-2770.
  • COBALT BASED FERROMAGNETIC SHAPE MEMORY ALLOYS – Kopeček, J.; Jarošová, M.; Jurek, K.; Drahokoupil, J.; Kratochvílová, I.; Fekete, L.; Bodnárová, L.; Seiner, H. et al., Materials Structure in Chemistry, Biology, Physics and Technology. 2011, 18(3), 191-193. ISSN 1211-5894.
  • Local dynamic mechanical properties of native porcine endplate – Šepitka, J.; Lukeš, J.; Řezníček, J., World Academy of Science, Engineering and Technology. 2011, 2011(60), 702-705. ISSN 2070-3724.
  • NANOSCALE DYNAMIC MECHANICAL ANALYSIS OF SOFT TISSUE AND ITS FINITE ELEMENT MODELING – Šepitka, J.; Lukeš, J.; Kuželka, J.; Řezníček, J., Chemicke Listy. 2011, 105(17), 844-845. ISSN 0009-2770.
  • Nanoindentation of Very Thin Hard Coatings – Šepitka, J.; Lukeš, J.; Jech, V.; Černý, F.; Řezníček, J., Chemické listy. 2011, 105(17), 846-847. ISSN 0009-2770.
  • Adhesion properties of DLC and TiO2 thin films using scratch test methods – Mikšovský, J.; Kutílek, P.; Lukeš, J.; Tolde, Z.; Remsa, J.; Kocourek, T.; Uherek, F.; Jelínek, M., Chemicke Listy. 2011, 105(17), 692-695. ISSN 0009-2770.

2010

  • EFFECT OF TIME ON NANOINDENTATION ELASTIC MODULUS OF THREE DIFFERENT DENTAL RESTORATIVE COMPOSITES – Eichlerová, R.; Lukeš, J.; Konvičková, S.; Bradna, P., Chemicke Listy. 2010, 104/2010(15), 307-309. ISSN 0009-2770.
  • ON THE EVALUATION OF ELASTIC PROPERTIES FROM NANOINDENTATION OF HETEROGENEOUS SYSTEMS – Němeček, J.; Lukeš, J., Chemicke Listy. 2010, 104(S), 279-282. ISSN 0009-2770.
  • DYNAMIC NANOINDENTATION OF BOVINE INTERVERTEBRAL END PLATE – Lukeš, J.; Šepitka, J.; Němeček, J., Chemicke Listy. 2010, 104(S), 338-341. ISSN 0009-2770.
  • Time-dependent mechanical characteristics measured through the use of a microindentation technique – Minster, J.; Bláhová, O.; Lukeš, J.; Němeček, J., Mechanics of Time-Dependent Materials. 2010, 1-9. ISSN 1573-2738.

2009

  • Nanoindentation of porcine bone lamellae – Lukeš, J.; Otáhal, S., Computer Methods in Biomechanics and Biomedical Engineering. 2009, 2009(12), 177-178. ISSN 1025-5842.
  • Comparative Study of Macro vs. Micro Test of Osteoporotic Rat Bones – Vondrová, J.; Lukeš, J.; Sedláček, R.; Růžička, P.; Suchý, T., Bulletin of Applied Mechanics. 2009, 5(20), 93-95. ISSN 1801-1217.
  • Elastic Modulus Determination on Osteoporotic Rat Bones by the Three-point Bending Test and Nanoindentation – Vondrová, J.; Lukeš, J.; Sedláček, R.; Růžička, P., Engineering of Biomaterials. 2009, 12(90), 6-8. ISSN 1429-7248.

Stať ve sborníku

2020

  • NANOINDENTATION AND ACCELERATED PROPERTY MAPPING OF PORTLAND CEMENT PASTE – Němeček, J.; Němeček, J.; Lukeš, J., In: 14th INTERNATIONAL CONFERENCE ON LOCAL MECHANICAL PROPERTIES - LMP 2019. Praha: Czech Technical University in Prague, 2020. p. 96-100. ACTA POLYTECHNICA CTU PROCEEDINGS. vol. 27. ISSN 2336-5382. ISBN 978-80-01-06735-2.

2016

  • Micromechanical Characterization of Gellan Gum Based Bone Scaffold – Krčmářová, N.; Kytýř, D.; Petráňová, V; Šepitka, J.; Lukeš, J.; Gantar, A; Novak, S, In: Program and book of abstracts. Ljubljana: IMT Ljubljana, 2016, ISBN 978-961-94088-0-3.
  • Dopace diamantu podobného uhlíku pro použití v medicíně – Písařík, P.; Jelínek, M.; Remsa, J.; Mikšovský, J.; Kocourek, T.; Zemek, K.; Jurek, K.; Lukeš, J. et al., In: Biomateriály a jejich povrchy IX.. Praha: České vysoké učení technické v Praze, 2016. pp. 61-62. ISBN 978-80-01-06004-9.

2015

  • CELL MEMBRANE STIFFNESS AND ADHESION MEASURED BY INSTRUMENTED NANOINDENTATION – Lukeš, J.; Šepitka, J., In: ESB 2015 – Book of Extended Abstracts. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. ISBN 978-80-01-05777-3.
  • NANOMECHANICAL AND RAMAN MAPPING OF TEETH – Lukeš, J.; Carlson, D.; Šepitka, J., In: ESB 2015 – Book of Extended Abstracts. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. ISBN 978-80-01-05777-3.
  • NANOINDENTATION OF 3D PRINTED POLYLACTIC ACID BONE SCAFFOLD – Lukeš, J.; Šepitka, J.; Berg, M.; Kytýř, D., In: ESB 2015 – Book of Extended Abstracts. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. ISBN 978-80-01-05777-3.
  • SECOND HARMONIC GENERATION IMAGING AND NANOINDENTATION OF CARTILAGINOUS TISSUES – Šepitka, J.; Burdikova, Z.; Filova, E.; Lukeš, J., In: ESB 2015 – Book of Extended Abstracts. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. ISBN 978-80-01-05777-3.
  • Mapping of Local Changes of Mechanical Properties in Trabecular Interconnections – Kytýř, D.; Fenclová, N.; Koudelka, P.; Doktor, T.; Šepitka, J.; Lukeš, J., In: Proceedings of the 11th Conference on Local Mechanical Properties. Uetikon-Zurich: Trans Tech Publications, 2015, pp. 129-133. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-03835-555-7. Available from: http://www.scientific.net/KEM.662.129
  • Micromechanical Properties of Biocompatible Materials for Bone Tissue Engineering Produced by Direct 3D Printing – Koudelka, P.; Doktor, T.; Kytýř, D.; Fenclová, N.; Šepitka, J.; Lukeš, J., In: Proceedings of the 11th Conference on Local Mechanical Properties. Uetikon-Zurich: Trans Tech Publications, 2015. pp. 138-141. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-03835-555-7.
  • Cell Memrane Stiffness and Adhesion Measured by Instrumented nanoindentation – Lukeš, J.; Šepitka, J., In: ESB 2015 – Book of Extended Abstracts. Praha: České vysoké učení technické v Praze, Fakulta strojní, 2015. ISBN 978-80-01-05777-3.
  • Morphology, antibacterial and mechanical properties of silver doped diamond like carbon prepared by dual pulsed laser deposition – Písařík, P.; Jelínek, M.; Remsa, J.; Mikšovský, J.; Zemek, J.; Jurek, K.; Lukeš, J.; Šepitka, J. et al., In: International conference on diamond and carbon materials. Oxford: Elsevier, 2015. pp. 36.
  • Influence of diamond and graphite bonds on mechanical properties of DLC thin films – Písařík, P.; Jelínek, M.; Kocourek, T.; Remsa, J.; Zemek, J.; Lukeš, J.; Šepitka, J., In: Journal of Physics Conference Series. Bristol: IOP Publishing Ltd, 2015. p. 1-6. ISSN 1742-6588.

2014

  • Material testing of natural stones used in historical buildings based on scanning electron microscopy and nanoindentation – Koudelka, P.; Kytýř, D.; Koudelková, V.; Lukeš, J.; Doktor, T.; Valach, J., In: Key Engineering Materials. Zurich: TRANS TECH PUBLICATIONS LTD, 2014. p. 186-189. ISSN 1013-9826. ISBN 978-3-03785-876-9.
  • An investigation of the influence of cart ilaginous tissue microst ructure on its local mechanical properties – Šepitka, J.; Lukeš, J.; Burdikova, Z.; Filova, E.; Řezníček, J., In: HB 2014 Book of abstracts. Plzeň: Západočeská universita, 2014, ISBN 978-80-261-0421-6. Available from: http://www.zcu.cz/pracoviste/vyd/online/Humanic_web.pdf
  • Single cells compression testing – Lukeš, J.; Grznarova, P.; Fuzik, T.; Řezníčková, J.; Šepitka, J., In: HB 2014 Book of abstracts. Plzeň: Západočeská universita, 2014, ISBN 978-80-261-0421-6. Available from: http://www.zcu.cz/pracoviste/vyd/online/Humanic_web.pdf
  • Single Cell Compression Testing – Lukeš, J.; Šepitka, J.; Fuzik, T.; Grznarova, P., In: 18th International Microscopy Congress. Praha: Československá mikroskopická společnost, 2014, ISBN 978-80-260-6720-7. Available from: https://micron.greception.com/imc2014/abstract-book/online/ls/#abstract-3120
  • Influence of diamond and graphite bonds on mechanical properties of DLC thin films – Písařík, P.; Jelínek, M.; Kocourek, T.; Remsa, J.; Zemek, J.; Lukeš, J.; Šepitka, J., In: 23th International Laser Physics Workshop. 2014. pp. 1.
  • Inspection of post impact fatigue damage in carbon fibre composite using modulus mapping technique – Koudelka, P.; Fíla, T.; Doktor, T.; Kytýř, D.; Valach, J.; Šepitka, J.; Lukeš, J., In: Local Mechanical Properties X. Zurich: TRANS TECH PUBLICATIONS LTD, 2014. p. 245-248. ISSN 1013-9826. ISBN 978-3-03835-062-0.
  • Mathematical model of human osteon and its validation by nanomechanical testing of bone lamella – Korsa, R.; Lukeš, J.; Šepitka, J.; Kytyr, D.; Mareš, T., In: Computer Methods in Biomechanics and Biomedical Engineering. London: Taylor & Francis, 2014. pp. 24-25. ISSN 1025-5842.
  • Compression tests of a living cell: a contact detection problem – Šepitka, J.; Lukeš, J.; Grznarová, P.; Fuzik, T., In: Computer Methods in Biomechanics and Biomedical Engineering. London: Taylor & Francis, 2014. p. 40-41. ISSN 1025-5842.

2013

  • Mechanical properties of deep-sea molluscan shell – Hrabánková, I.; Frýda, J.; Šepitka, J.; Sasaki, T.; Frýdová, B.; Lukeš, J., In: Computer Methods in Biomechanics and Biomedical Engineering. London: Taylor & Francis, 2013. p. 287-289. ISSN 1025-5842.
  • Nanoindentation mapping reveals gradients in the mechanical properties of dental enamel in rat incisors – Frýdová, B.; Šepitka, J.; Stejskal, V.; Frýda, J.; Lukeš, J., In: Computer Methods in Biomechanics and Biomedical Engineering. London: Taylor & Francis, 2013. p. 290-291. ISSN 1025-5842.
  • Crystallographic texture determines mechanical properties of molluscan nacre – Frýda, J.; Šepitka, J.; Frýdová, B.; Hrabánková, I.; Lukeš, J.; Klicnarová, M., In: Computer Methods in Biomechanics and Biomedical Engineering. London: Taylor & Francis, 2013. p. 292-293. ISSN 1025-5842.
  • SHG IMAGING IN TISSUE ENGEERING – Burdíková, Z.; Filová, E.; Filová, E.; Šepitka, J.; Lukeš, J.; Švindrych, Z.; Straka, F.; Hadraba, D. et al., In: Proceedings of 12th Multinational Congress on Microscopy 2013. 2013,
  • Micro and Macro Scratch and Microhardness Study of Biocompatible DLC and TiO2 Films Prepared by Laser – Mikšovský, J.; Lukeš, J.; Tolde, Z.; Remsa, J.; Kocourek, T.; Jelínek, M., In: Advanced Materials Research. Durnten-Zurich: Trans Tech Publications, 2013. pp. 25-29. ISSN 1022-6680. ISBN 9783037855973.

2012

  • Surface Characterisation of Titanium Alloy Nanolayer Modified for Bioimplants – Černý, F.; Jech, V.; Vlčák, P.; Horažďovský, T.; Konvičková, S.; Šepitka, J.; Lukeš, J.; Kovac, J. et al., In: Smart Surfaces 2012. Dublin: University College Dublin, 2012. pp. 97.
  • Application of micro and macro scratch tests measurement for testing of DLC and TiO2 thin films – Mikšovský, J.; Lukeš, J.; Tolde, Z.; Remsa, J.; Kocourek, T., In: Plasma Surface Engineering 2012 13th International Conference. Dresden: Europäische Forschungsgesellschaft Dünne Schichten e.V., 2012. pp. 1-4.
  • Nanoindentation of Histological Sections of Intervertebral Disc-Vertebral Body Interface – Šepitka, J.; Lukeš, J.; Staněk, L.; Řezníček, J., In: 14th Conference on Human Biomechanics. Praha: Academy of Sciences of the Czech Republic, 2012, pp. 80-81.
  • The Influence of Steam Sterilization Processes on the Micro- and Macromechanical Properties of Polyamide Fiber-Reinforced PDMS Composites for Medical Device Applications – Sochor, M.; Balík, K.; Sedláček, R.; Suchý, T.; Sucharda, Z.; Šepitka, J.; Lukeš, J., In: Proceedings of the 50th Annual Conference on Experimental Stress Analysis. Praha: Czech Technical University in Prague, 2012. pp. 431-434. ISBN 978-80-01-05060-6.

2011

  • Local dynamic mechanical properties of native porcine endplate – Šepitka, J.; Lukeš, J.; Řezníček, J., In: WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY. Waset.org: World Academy of Science, Engineering and Technology, 2011, pp. 702-705. ISSN 2010-376X.
  • Production and Testing of Thermocouples Type Cu-CuNi – Kolařík, L.; Válová, M.; Vondrouš, P.; Kovanda, K.; Šepitka, J.; Lukeš, J., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011. pp. 42. ISBN 978-80-244-2889-5.
  • LOCAL MICROMECHANICAL PROPERTIES OF DENTAL COMPOSITES – Prejzek, O.; Šepitka, J.; Španiel, M.; Lukeš, J., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011. pp. 64. ISBN 978-80-244-2889-5.
  • Comparison of micro and macro scratch testing methods for adhesion and microhardness determination of thin films – Mikšovský, J.; Kutílek, P.; Lukeš, J.; Tolde, Z.; Remsa, J.; Kocourek, T.; Jelínek, M., In: 11th International Conference on Laser Ablation. Zacahuitzco: Linea Grafica Diseno, 2011. pp. 81.
  • Nanoindentation Testing of Composites based on Collagen and poly(DL-lactide) Nanofibers – Suchý, T.; Sucharda, Z.; Šupová, M.; Balík, K.; Šepitka, J.; Lukeš, J., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011. pp. 74. ISBN 978-80-244-2889-5.
  • VISCOELASTIC PROPERTIES OF PORCINE APOPHYSEAL JOINT – Otáhal, M.; Šepitka, J.; Lukeš, J.; Otáhal, S.; Sochor, M.; Otáhal, M., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011. pp. 59. ISBN 978-80-244-2889-5.
  • NANOINDENTATION OF GELATINE/HAP NANOCOMPOSITE – Marx, D.; Šepitka, J.; Lukeš, J.; Balík, K., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011, pp. 50. ISBN 978-80-244-2889-5.
  • USE OF MODULUS MAPPING TECHNIQUE TO INVESTIGATE CROSS-SECTIONAL MATERIAL PROPERTIES OF EXTRACTED SINGLE HUMAN TRABECULAE – Jiroušek, O.; Kytýř, D.; Zlámal, P.; Doktor, Tomáš; Šepitka, J.; Lukeš, J., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011. pp. 34. ISBN 978-80-244-2889-5.
  • COMPOSITION, STRUCTURAL AND MATERIAL PROPERTIES OF LEECH TEETH - EXAMPLE OF BIOINSPIRATION IN MATERIALS RESEARCH – Šepitka, J.; Lukeš, J.; Jiroušek, O.; Kytýř, D.; Valach, J., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011, pp. 68. ISBN 978-80-244-2889-5.
  • Nanoscratch and Nanowear of Dental Filling Composites – Lukeš, J.; Šepitka, J.; Válová, M.; Eichlerová, R., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011, pp. 46. ISBN 978-80-244-2889-5.
  • Dynamic mechanical properties of soft tissues obtained using nanoindentation localized by fluorescence microscope – Šepitka, J.; Lukeš, J.; Staněk, L.; Řezníček, J., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011, pp. 67. ISBN 978-80-244-2889-5.
  • Development and visualisation of bovine intervertebral disc by SHG imaging and dynamic nanoindentation – Burdíková, Z.; Filová, E.; Šepitka, J.; Lukeš, J.; Čapek, M.; Klepetář, J.; Janáček, J., In: Proceedings 10th Multinational Congress on Microscopy 2011. Ancona: Tipolitografia Kennedy srl, 2011. pp. 413-414.
  • Nanowear Testing of Composite Materials – Sedláček, R.; Suchý, T.; Šepitka, J.; Lukeš, J.; Sochor, M.; Balík, K.; Sucharda, Z.; Beneš, J., In: Local Mechanical Properties 2011. Olomouc: Palacky University, 2011. pp. 66. ISBN 978-80-244-2889-5.
  • Nanoscale mechanical analysis of dental filling composite and its finite element modeling – Eichlerová, R.; Lukeš, J.; Šepitka, J., In: Computer Methods in Biomechanics and Biomedical Engineering. London: Taylor & Francis, 2011. p. 261-262. ISSN 1025-5842.
  • Dynamic Nanoindentation of Porcine Spinal Zygapophyseal Joint Cartilage – Šepitka, J.; Otáhal, M.; Lukeš, J., In: Computer Methods in Biomechanics and Biomedical Engineering. London: Taylor & Francis, 2011. p. 265-266. ISSN 1025-5842.

2010

  • Tribological Properties of Carbon Nanolayers Irradiated by Nitrogen Ions on Ti6Al4V Alloy – Černý, F.; Wiesenberg, J.; Jech, V.; Konvičková, S.; Lukeš, J., In: 15th International Metallurgy & Materials Congress. Ankara: UCTEA Chamber of Metallurgical Engineers, 2010. pp. 1977-1982.
  • Zygapophyseal Joint Cartilage - Its Mechanical Properties and its Role in Intervertebral Joints – Otáhal, M.; Šepitka, J.; Lukeš, J.; Otáhal, S.; Sochor, M., In: Human Biomechanics 2010. Liberec: Technical University of Liberec, 2010. pp. 218-223. ISBN 978-80-7372-648-5.
  • Numerical analysis of nanoDMA experiment applied on end plate – Šepitka, J.; Lukeš, J.; Řezníček, J., In: Human Biomechanics 2010. Liberec: Technical University of Liberec, 2010. pp. 306-311. ISBN 978-80-7372-648-5.
  • Nanoindentation of dental composites – Eichlerová, R.; Lukeš, J.; Konvičková, S.; Bradna, P., In: Human Biomechanics 2010. Liberec: Technical University of Liberec, 2010, pp. 49-55. ISBN 978-80-7372-648-5.

2009

  • Mechanical characterization of tissue by nanoindentation – Lukeš, J.; Němeček, J.; Otáhal, S., In: ICTE2009 International conference on tissue engineering an ECCOMAS thematic conference. Lisboa: IST Press, 2009, pp. 17-23. ISBN 978-972-8469-90-0.
  • Nanoindentation of Osteoporotic Rat Bones – Vondrová, J.; Lukeš, J., In: 26th Symposium on Advances in Experimental Mechanics. Montanuniversitat Leoben, 2009. p. 247-248. ISBN 978-3-902544-02-5.

2008

  • Identification of Material Anisotropy of Mineralized Tissue by Nanoindentation – Lukeš, J.; Zysset, P.K.; Otáhal, S., In: Human Biomechanics 2008 International Conference, Extended Abstracts. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2008, pp. 30-32. ISBN 978-80-01-04163-5.
  • Nanoindentation - the Tool For Material Identification of Biological Tissues – Lukeš, J.; Mareš, T.; Otáhal, S., In: Abstracts of the 16th Congress, European Society of Biomechanics Lucerne, Switzerland, 6-9 July 2008. Amsterdam: Elsevier, 2008, pp. S513. ISSN 0021-9290.
  • Examination of the Microrheology of Intervertebral Disc by Nanoindentation – Lukeš, J.; Mareš, T.; Němeček, J.; Otáhal, S., In: IFMBE Proceedings. Berlin: Springer, 2008. pp. 1792-1796. ISSN 1680-0737. ISBN 978-3-540-92840-9.
  • Measurement of Vicsoelastic Properties of Thermosetting Material Using Nanoindentation – Lukeš, J.; Němeček, J.; Minster, J., In: 25th Symposium on Advances in Experimental Mechanics. Prague: Czech Technical University - Fac. of Mechanical Engineering, 2008. pp. 161-162. ISBN 978-80-01-04162-8.

2006

  • Microstructure and Mechanical Characteristic of Lumbar Annulus Fibrosus – Lukeš, J.; Otáhal, M.; Otáhal, S., In: Proceedings of the 5th European Symposium on Biomedical Engineering. Vienna: International Federation for Medical & Biological Engineering, 2006, pp. 30-32.
  • Microstructure and Mechanical Characteristic of Intervertebral Disc and Annulus Fibrosus – Lukeš, J.; Otáhal, M.; Otáhal, S., In: Human Biomechanics 2006. Brno: VUT v Brně, Fakulta strojní, Ústav mechaniky těles, 2006, pp. 144-145. ISBN 80-214-3232-2.
  • Kinematics and Transmission Properties of Spine – Otáhal, M.; Lukeš, J.; Otáhal, S.; Sochor, M., In: Journal of Biomechanics, Abstracts of the 5th World Congress of Biomechanics, Munich, Germany, 29 July - 4 August 2006. Berlin: Elsevier, 2006. pp. 542. ISSN 0021-9290.
  • Mathematical Modeling of Spine and Its Possibilities in Aplication for Prosthetic Creation – Otáhal, M.; Lukeš, J.; Otáhal, S.; Sochor, M., In: Human Biomechanics 2006. Brno: VUT v Brně, Fakulta strojní, Ústav mechaniky těles, 2006. pp. 154-155. ISBN 80-214-3232-2.
  • The System View of the Spinal System and the Mathematical Modeling of the Spine – Otáhal, M.; Lukeš, J.; Otáhal, S.; Sochor, M., In: Proceedings of the 5th European Symposium on Biomedical Engineering. Vienna: International Federation for Medical & Biological Engineering, 2006, pp. 5-6.

Patent, užitný a průmyslový vzor

2012

  • Přípravek na broušení a dvouosou nanoindentaci biologických vzorků – Šepitka, J.; Lukeš, J., Czechia. Utility Model CZ 23512. 2012-03-12.

2011

  • Přípravek na broušení a dvouosou nanoindentaci biologických vzorků – Šepitka, J.; Lukeš, J., Czechia. Utility Model Application CZ 23512., 2011

Prototyp, funkční vzorek

2013

  • Šoupátko optických filtrů – Lukeš, J.; Šepitka, J., [Functional Sample] 2013.
  • Člen optického sloupce – Lukeš, J.; Šepitka, J., [Functional Sample] 2013.
  • Základní deska mikroskopu Triboindenteru – Lukeš, J.; Šepitka, J., [Functional Sample] 2013.

2012

  • Přípravek na uchycení vzorků pro nanoindentaci do rotačního stolku – Lukeš, J.; Šepitka, J., [Functional Sample] 2012.
  • Přípravek na broušení a víceosou nanoindentaci pod hladinou kapaliny – Šepitka, J.; Lukeš, J., [Functional Sample] 2012.

2010

  • Přípravek na dvouosou nanoindentaci – Lukeš, J.; Šepitka, J.; Otáhal, M., [Functional Sample] 2010.

2007

  • Micro-tester – Otáhal, M.; Kubový, P.; Lukeš, J.; Otáhal, S., [Prototype] 2007.

Zpráva

2016

  • Zprava o odborných činnostech prováděných na ČVUT FS v roce 2016 jakožto plnění úkolů grantu TA04010330 – Horný, L.; Chlup, H.; Veselý, J.; Voňavková, T.; Sedláček, R.; Šepitka, J.; Lukeš, J.; Adámek, T. et al., [Research Report] 2016. Report no. 12105/16/44.

2012

  • Uhlíkové kompozity - wear – Šepitka, J.; Lukeš, J.; Suchý, T., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2012. Report no. 12105/12/63.
  • Uhlíkový kompozit C/PDMS – Šepitka, J.; Lukeš, J.; Suchý, T., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2012. Report no. 12105/12/62.

2011

  • Nanoindentace uhlíkových kompozitů – Šepitka, J.; Lukeš, J.; Suchý, T., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2011. Report no. 12105/11/55.
  • ScanningWear uhlíkových kompozitů – Šepitka, J.; Lukeš, J.; Suchý, T., [Research Report] Praha: České vysoké učení technické v Praze, Fakulta strojní, 2011. Report no. 12105/11/54.

2006

  • Matematické modelování meziobratlového skloubení s uvážením poddajnosti - rovinný model – Otáhal, M.; Lukeš, J., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2006. Report no. 2051/06/25.
  • 2D model meziobratlového skloubení s uvážením poddajnosti meziobratlového kloubu – Otáhal, M.; Lukeš, J., [Research Report] Praha: ČVUT FS, Ústav mechaniky, Laboratoř biomechaniky člověka, 2006. Report no. 2051/06/18.

Kvalifikační zpráva

2016

  • Experimentální analýza mechanických vlastností kloubní chrupavky meziobratlových kloubů, s ohledem na její vnitřní strukturu – Kysel, M., Kladno: 2016. Master Thesis. České vysoké učení technické v Praze, Fakulta biomedicínského inženýrství.

Kapitola v knize

2006

  • Kinematics and Transmission Properties of Spine-the System View and Its Possibilities in Application for Prosthetic Creation – Otáhal, M.; Lukeš, J.; Otáhal, S.; Sochor, M., In: Biomechanics, Biofluidics and Alternative Biomaterial Substitutions. Praha: Univerzita Karlova, Fakulta tělesné výchovy a sportu, 2006. p. 75-76. ISBN 80-86317-40-4.

Pořádání konference, workshopu, výstavy

2009

  • LOCAL MECHANICAL PROPERTIES 2009 – Němeček, J.; Lukeš, J., [Conference Hosting] 2009.

Vyzvaná nepublikovaná přednáška

2016

  • Nanoindentation: applications in practice – Němeček, J.; Lukeš, J., [Invited unpublished scientific lecture] Lyon: Nanocem. 2016-10-17.

2012

  • Depth Profiling of Thin Coating Using Partial Unloading Nanoindentation – Šepitka, J.; Lukeš, J.; Černý, F.; Jech, V., [Invited unpublished scientific lecture] Bratislava: Slovak University of Technology in Bratislava. 2012-04-02.

2008

  • Measurement of Viscoelastic Properties of Polymer and Biological Tissue – Lukeš, J.; Němeček, J. et al., [Invited unpublished scientific lecture] Mnichov - Ismaning: Hysitron, Inc.. 2008-10-30.
  • Identification of Anisotropy of Elastic Biological Tissues Using Nanoindentation – Lukeš, J., [Invited unpublished scientific lecture] ČVUT v Praze, Fakulta stavební: RMI, s. r. o.. 2008-08-20.